ANALYSIS OF THE INFLUENCE OF THE VARIATION OF THE FUNCTIONAL GEOMETRY OF THE CUTTING TOOL ON THE CUTTING FORCE DURING TURNING WITH TRANSVERSE FEED
The good development of the chipping processing processes is greatly influenced by the rigidity of the technological system, but also by the size and variation of the forces that appear during the chipping processing process. The force required to detach the chip must be known both for the design...
Saved in:
| Main Authors: | , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Academica Brancusi
2024-05-01
|
| Series: | Fiabilitate şi Durabilitate |
| Subjects: | |
| Online Access: | https://www.utgjiu.ro/rev_mec/mecanica/pdf/2024-01/11_M%C4%83d%C4%83lin%20TOMESCU,%20Cosmin%20IONESCU.pdf |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| _version_ | 1850025586728108032 |
|---|---|
| author | Mădălin TOMESCU Cosmin IONESCU |
| author_facet | Mădălin TOMESCU Cosmin IONESCU |
| author_sort | Mădălin TOMESCU |
| collection | DOAJ |
| description | The good development of the chipping processing processes is greatly influenced by the
rigidity of the technological system, but also by the size and variation of the forces that appear
during the chipping processing process. The force required to detach the chip must be known both
for the design of the machine tool, the devices and the cutting tools, and for establishing some
limit values of its size, depending on the strength or, in most cases, the rigidity of the processed
semi-finished product. The paper presents the variation of the values of the cutting force for the
transverse turning operation due to the variation of the functional geometry of the cutting tool
during the cutting process in order to optimize the geometry of the active part of the cutting tool.
Thus, in the work, the recommended optimal constructive geometry of a lathe knife that can be
used for turning a part with the diameter
150mm
, as well as the parameters of the cutting
regime, was established. Under these conditions, a correlation was identified between the values
of the functional geometric parameters of the cutting tool used for transverse turning of C45 steel
(1.0503): EN 10277-2-2008-
150mm and the cutting forces that occur during cutting |
| format | Article |
| id | doaj-art-a3da4c534aed42abb15140bd409a93a3 |
| institution | DOAJ |
| issn | 1844-640X 2344-3669 |
| language | English |
| publishDate | 2024-05-01 |
| publisher | Academica Brancusi |
| record_format | Article |
| series | Fiabilitate şi Durabilitate |
| spelling | doaj-art-a3da4c534aed42abb15140bd409a93a32025-08-20T03:00:47ZengAcademica BrancusiFiabilitate şi Durabilitate1844-640X2344-36692024-05-011717885ANALYSIS OF THE INFLUENCE OF THE VARIATION OF THE FUNCTIONAL GEOMETRY OF THE CUTTING TOOL ON THE CUTTING FORCE DURING TURNING WITH TRANSVERSE FEEDMădălin TOMESCU0Cosmin IONESCU1Lucian Blaga University of Sibiu, Sibiu, ROMANIAEnergy High School of Tg-Jiu, Gorj, ROMANIAThe good development of the chipping processing processes is greatly influenced by the rigidity of the technological system, but also by the size and variation of the forces that appear during the chipping processing process. The force required to detach the chip must be known both for the design of the machine tool, the devices and the cutting tools, and for establishing some limit values of its size, depending on the strength or, in most cases, the rigidity of the processed semi-finished product. The paper presents the variation of the values of the cutting force for the transverse turning operation due to the variation of the functional geometry of the cutting tool during the cutting process in order to optimize the geometry of the active part of the cutting tool. Thus, in the work, the recommended optimal constructive geometry of a lathe knife that can be used for turning a part with the diameter 150mm , as well as the parameters of the cutting regime, was established. Under these conditions, a correlation was identified between the values of the functional geometric parameters of the cutting tool used for transverse turning of C45 steel (1.0503): EN 10277-2-2008- 150mm and the cutting forces that occur during cuttinghttps://www.utgjiu.ro/rev_mec/mecanica/pdf/2024-01/11_M%C4%83d%C4%83lin%20TOMESCU,%20Cosmin%20IONESCU.pdfturning with transverse feedcutting forcecutting toolfunctional geometry |
| spellingShingle | Mădălin TOMESCU Cosmin IONESCU ANALYSIS OF THE INFLUENCE OF THE VARIATION OF THE FUNCTIONAL GEOMETRY OF THE CUTTING TOOL ON THE CUTTING FORCE DURING TURNING WITH TRANSVERSE FEED Fiabilitate şi Durabilitate turning with transverse feed cutting force cutting tool functional geometry |
| title | ANALYSIS OF THE INFLUENCE OF THE VARIATION OF THE FUNCTIONAL GEOMETRY OF THE CUTTING TOOL ON THE CUTTING FORCE DURING TURNING WITH TRANSVERSE FEED |
| title_full | ANALYSIS OF THE INFLUENCE OF THE VARIATION OF THE FUNCTIONAL GEOMETRY OF THE CUTTING TOOL ON THE CUTTING FORCE DURING TURNING WITH TRANSVERSE FEED |
| title_fullStr | ANALYSIS OF THE INFLUENCE OF THE VARIATION OF THE FUNCTIONAL GEOMETRY OF THE CUTTING TOOL ON THE CUTTING FORCE DURING TURNING WITH TRANSVERSE FEED |
| title_full_unstemmed | ANALYSIS OF THE INFLUENCE OF THE VARIATION OF THE FUNCTIONAL GEOMETRY OF THE CUTTING TOOL ON THE CUTTING FORCE DURING TURNING WITH TRANSVERSE FEED |
| title_short | ANALYSIS OF THE INFLUENCE OF THE VARIATION OF THE FUNCTIONAL GEOMETRY OF THE CUTTING TOOL ON THE CUTTING FORCE DURING TURNING WITH TRANSVERSE FEED |
| title_sort | analysis of the influence of the variation of the functional geometry of the cutting tool on the cutting force during turning with transverse feed |
| topic | turning with transverse feed cutting force cutting tool functional geometry |
| url | https://www.utgjiu.ro/rev_mec/mecanica/pdf/2024-01/11_M%C4%83d%C4%83lin%20TOMESCU,%20Cosmin%20IONESCU.pdf |
| work_keys_str_mv | AT madalintomescu analysisoftheinfluenceofthevariationofthefunctionalgeometryofthecuttingtoolonthecuttingforceduringturningwithtransversefeed AT cosminionescu analysisoftheinfluenceofthevariationofthefunctionalgeometryofthecuttingtoolonthecuttingforceduringturningwithtransversefeed |