Optimization of Reinforced Aluminium Scraps from the Automobile Bumpers with Nickel and Magnesium Oxide in Stir Casting

Here, the investigation is spotlighted on the aluminium alloy from the waste materials of the automobile bumpers which is a reinforced metal matrix composite created with 5 percentage of nickel and 5 percentage of magnesium oxide through the stir casting method. The stir casting process inputs param...

Full description

Saved in:
Bibliographic Details
Main Authors: V. Vijayan, A. Parthiban, T. Sathish, L. Ponraj Sankar, S. Dinesh Kumar, S. Saravanakumar, Dawit Tafesse
Format: Article
Language:English
Published: Wiley 2021-01-01
Series:Advances in Materials Science and Engineering
Online Access:http://dx.doi.org/10.1155/2021/3735438
Tags: Add Tag
No Tags, Be the first to tag this record!
Description
Summary:Here, the investigation is spotlighted on the aluminium alloy from the waste materials of the automobile bumpers which is a reinforced metal matrix composite created with 5 percentage of nickel and 5 percentage of magnesium oxide through the stir casting method. The stir casting process inputs parameters such as pressure of squeezing, time of squeezing, and speed of stirrer which were optimized based on the two mechanical properties’ outcome such as the tensile strength (TS) and Rockwell hardness. There are nine different experiments which were conducted based on the L9 array. The Taguchi method is used to identify the optimum input values for the greatest result of the processing condition by Minitab software. The responses-based parameters were ordered based on the rank identified through the investigational effects. Finally, the optimized input consideration values and the linear equations are recommended for both the considered outputs as conclusions.
ISSN:1687-8434
1687-8442