Hystimator: DRT‐based hysteresis modelling for accurate SoC estimation in LFP battery cells

Abstract State of Charge (SoC) estimation for Lithium‐Iron Phosphate (LFP) batteries is challenging due to a flat Open Circuit Voltage (OCV) curve and a well‐known hysteresis effect. The authors built upon a previous study, which has shown that hysteresis in LFP is not an inherent characteristic but...

Full description

Saved in:
Bibliographic Details
Main Authors: Guillaume Thenaisie, Claudio Brivio
Format: Article
Language:English
Published: Wiley 2024-12-01
Series:IET Renewable Power Generation
Subjects:
Online Access:https://doi.org/10.1049/rpg2.13130
Tags: Add Tag
No Tags, Be the first to tag this record!
Description
Summary:Abstract State of Charge (SoC) estimation for Lithium‐Iron Phosphate (LFP) batteries is challenging due to a flat Open Circuit Voltage (OCV) curve and a well‐known hysteresis effect. The authors built upon a previous study, which has shown that hysteresis in LFP is not an inherent characteristic but a very slow relaxation process when compared to other battery chemistries. Distribution of Relaxation Times (DRT) is used to deconvolve Electro‐Impedance Spectroscopy (EIS) measurements and model the hysteresis effect. The extracted DRT parameters show good agreement at low frequencies with previous thermodynamic studies in both fresh and aged cell conditions. The proposed model, called hystimator, integrates the hysteresis characteristics into a physics‐based Electro‐Chemical Model (ECM). The validation results show a significant reduction in the Root Mean Square Error (RMSE) during real‐world laboratory testing. This approach holds promise for SoC estimation in LFP battery cells, especially in embedded Battery Management System (BMS).
ISSN:1752-1416
1752-1424