Investigation of deformation and microstructure of bainite in Cu-9.97%Al-4.62%mn alloy

In this study, some physical and mechanical properties in Cu-9.97%Al-4.62%Mn (wt%) alloy were investigated by X-ray diffraction (XRD), Scanning Electron Microscopy (SEM) and compression deformation test. Bainite phase were obtained in the samples according to SEM and XRD analyses. Compressi...

Full description

Saved in:
Bibliographic Details
Main Authors: Aldirmaz E., Aksoy I.
Format: Article
Language:English
Published: University of Belgrade, Technical Faculty, Bor 2014-01-01
Series:Journal of Mining and Metallurgy. Section B: Metallurgy
Subjects:
Online Access:http://www.doiserbia.nb.rs/img/doi/1450-5339/2014/1450-53391400004A.pdf
Tags: Add Tag
No Tags, Be the first to tag this record!
Description
Summary:In this study, some physical and mechanical properties in Cu-9.97%Al-4.62%Mn (wt%) alloy were investigated by X-ray diffraction (XRD), Scanning Electron Microscopy (SEM) and compression deformation test. Bainite phase were obtained in the samples according to SEM and XRD analyses. Compression stress was applied on the alloy in order to investigate the deformation effect on the bainite phase transformation. On the surface of the Cu-9.97%Al-4.62%Mn alloy after the deformation, both bainite and martensite variants formed.
ISSN:1450-5339