Large Eddy Simulation of Flow Around Twin Tower Buildings in Tandem Arrangements with Upstream Corner Modification
The aerodynamic performance of twin tall buildings immersed in the atmospheric boundary layer was numerically investigated by adopting the spatial-averaged large eddy simulation (LES) method. This study focused on the effects of corner cutting and chamfering. The buildings were both square and secti...
Saved in:
| Main Authors: | , , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
MDPI AG
2024-12-01
|
| Series: | Atmosphere |
| Subjects: | |
| Online Access: | https://www.mdpi.com/2073-4433/15/12/1540 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | The aerodynamic performance of twin tall buildings immersed in the atmospheric boundary layer was numerically investigated by adopting the spatial-averaged large eddy simulation (LES) method. This study focused on the effects of corner cutting and chamfering. The buildings were both square and sectional with a width-to-height ratio of 1:6, and were arranged in a tandem configuration with a spacing ratio of 2.0. The corner-cutting and chamfering measures were only applied to the upstream cylinder, with a corner modification rate of 10%. To generate the turbulent inflow boundary condition (IBC) for LES, steady-state equilibrium IBC expressions were introduced into the vortex method, which were implemented in the commercial code Ansys Fluent. The present simulation method and solution parameters were first verified by comparing the simulated wind field and the wind pressure distribution on a single tall building with those of the wind tunnel test. The influences of the corner-cutting and chamfering measures on the wind load of the tandem buildings were then comparatively studied concerning the statistical values of their aerodynamic force coefficients and wind pressure coefficients. The influence mechanism was analyzed based on the simulated time-averaged flow field and the instantaneous vortex structure around the buildings. The results indicated that upstream corner-cutting and chamfering measures can induce a diffusion angle shift in the separated shear flow from the leading edge of the upstream building, thus affecting the separation and reattachment of the separated upstream flow on the downstream building. Among the measures studied, upstream corner cutting is more effective in reducing wind pressure and aerodynamic force coefficients. |
|---|---|
| ISSN: | 2073-4433 |