Using a cohesive zone modeling to predict the compressive and tensile behavior on the failure load of single lap bonded joint
The detachment plates 2024T3 by an Araldite adhesive is studied in this work by using the finite element method to predict the damage in traction and compression behavior under the effect of geometrical parameters such as the lap length and the geometric shape of the plates called tapered. The numer...
Saved in:
| Main Authors: | , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Gruppo Italiano Frattura
2019-08-01
|
| Series: | Fracture and Structural Integrity |
| Subjects: | |
| Online Access: | https://www.fracturae.com/index.php/fis/article/view/2543 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| _version_ | 1841562327121395712 |
|---|---|
| author | Badr Benamar Mohamed Mokhtari Kouider Madani Habib Benzaama |
| author_facet | Badr Benamar Mohamed Mokhtari Kouider Madani Habib Benzaama |
| author_sort | Badr Benamar |
| collection | DOAJ |
| description | The detachment plates 2024T3 by an Araldite adhesive is studied in this work by using the finite element method to predict the damage in traction and compression behavior under the effect of geometrical parameters such as the lap length and the geometric shape of the plates called tapered. The numerical calculation is done by the ABAQUS calculation code. The adhesive has been modeled by an element of the cohesive zone CZM which takes part of the analysis in the first place on the influence of these parameters in mixed mode such as the critical energy and the maximum stress in opening and sliding. It is well shown that the behavior and parameters evaluated condition the resistance of our bonded structure to damage. The effect of these various parameters evaluated on the resistance is presented as results by failure load curves where each value represents an analyzed model. |
| format | Article |
| id | doaj-art-94bfaf74d92f4207bef195ceb359652b |
| institution | Kabale University |
| issn | 1971-8993 |
| language | English |
| publishDate | 2019-08-01 |
| publisher | Gruppo Italiano Frattura |
| record_format | Article |
| series | Fracture and Structural Integrity |
| spelling | doaj-art-94bfaf74d92f4207bef195ceb359652b2025-01-03T01:03:05ZengGruppo Italiano FratturaFracture and Structural Integrity1971-89932019-08-011350Using a cohesive zone modeling to predict the compressive and tensile behavior on the failure load of single lap bonded jointBadr Benamar0Mohamed Mokhtari1Kouider Madani2Habib Benzaama3Faculty of Technology, University Djillali Liabes, Sidi bel Abbes, Algeria.Laboratoire RTFM, Ecole Nationale Polytechnique Maurice Audin, Oran, Algeria.Laboratoire LMPM, University Djillali Liabes, Sidi bel Abbes, Algeria.Laboratoire LABAB, Ecole Nationale Polytechnique Maurice Audin, Oran, Algeria.The detachment plates 2024T3 by an Araldite adhesive is studied in this work by using the finite element method to predict the damage in traction and compression behavior under the effect of geometrical parameters such as the lap length and the geometric shape of the plates called tapered. The numerical calculation is done by the ABAQUS calculation code. The adhesive has been modeled by an element of the cohesive zone CZM which takes part of the analysis in the first place on the influence of these parameters in mixed mode such as the critical energy and the maximum stress in opening and sliding. It is well shown that the behavior and parameters evaluated condition the resistance of our bonded structure to damage. The effect of these various parameters evaluated on the resistance is presented as results by failure load curves where each value represents an analyzed model.https://www.fracturae.com/index.php/fis/article/view/2543Simple lap jointCZM (Cohesive Zone Modeling)VCCT (Virtual Crack Closure Technique)XFEM (Extended Finite Element Modeling)Tapered plates |
| spellingShingle | Badr Benamar Mohamed Mokhtari Kouider Madani Habib Benzaama Using a cohesive zone modeling to predict the compressive and tensile behavior on the failure load of single lap bonded joint Fracture and Structural Integrity Simple lap joint CZM (Cohesive Zone Modeling) VCCT (Virtual Crack Closure Technique) XFEM (Extended Finite Element Modeling) Tapered plates |
| title | Using a cohesive zone modeling to predict the compressive and tensile behavior on the failure load of single lap bonded joint |
| title_full | Using a cohesive zone modeling to predict the compressive and tensile behavior on the failure load of single lap bonded joint |
| title_fullStr | Using a cohesive zone modeling to predict the compressive and tensile behavior on the failure load of single lap bonded joint |
| title_full_unstemmed | Using a cohesive zone modeling to predict the compressive and tensile behavior on the failure load of single lap bonded joint |
| title_short | Using a cohesive zone modeling to predict the compressive and tensile behavior on the failure load of single lap bonded joint |
| title_sort | using a cohesive zone modeling to predict the compressive and tensile behavior on the failure load of single lap bonded joint |
| topic | Simple lap joint CZM (Cohesive Zone Modeling) VCCT (Virtual Crack Closure Technique) XFEM (Extended Finite Element Modeling) Tapered plates |
| url | https://www.fracturae.com/index.php/fis/article/view/2543 |
| work_keys_str_mv | AT badrbenamar usingacohesivezonemodelingtopredictthecompressiveandtensilebehavioronthefailureloadofsinglelapbondedjoint AT mohamedmokhtari usingacohesivezonemodelingtopredictthecompressiveandtensilebehavioronthefailureloadofsinglelapbondedjoint AT kouidermadani usingacohesivezonemodelingtopredictthecompressiveandtensilebehavioronthefailureloadofsinglelapbondedjoint AT habibbenzaama usingacohesivezonemodelingtopredictthecompressiveandtensilebehavioronthefailureloadofsinglelapbondedjoint |