Automated Measurement System for Room Acoustics – an Initial Feasibility Study
Currently used procedures in room acoustics measurements are not automated. Particularly in medium-sized and large areas they require a lot of time and intensive labour which directly translates into an increase in the measurement cost. Introduction of an automated system would increase efficiency o...
Saved in:
| Main Authors: | , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Institute of Fundamental Technological Research Polish Academy of Sciences
2015-05-01
|
| Series: | Archives of Acoustics |
| Subjects: | |
| Online Access: | https://acoustics.ippt.pan.pl/index.php/aa/article/view/1442 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| _version_ | 1850104989884612608 |
|---|---|
| author | Bartłomiej Dariusz BORKOWSKI Marek PLUTA |
| author_facet | Bartłomiej Dariusz BORKOWSKI Marek PLUTA |
| author_sort | Bartłomiej Dariusz BORKOWSKI |
| collection | DOAJ |
| description | Currently used procedures in room acoustics measurements are not automated. Particularly in medium-sized and large areas they require a lot of time and intensive labour which directly translates into an increase in the measurement cost. Introduction of an automated system would increase efficiency of the measurements, and therefore could present both practical and scientific benefit. The paper presents initial feasibility study for designing a system that permits the measurement of selected acoustic parameters for any choice of three-dimensional grid of measurement points throughout the volume of the room. The system will utilize an autonomous probe attached to a blimp, and will be able to measure and analyze acoustic characteristics of the rooms. The article discusses the initial choices of the system elements, starting from the general idea, through the mechanical design and control procedures, the software that controls positioning and flying of the probe, up to the automation of the measurement procedure and its possible impact on the acoustic field. |
| format | Article |
| id | doaj-art-84bdcfe1419b491d80293626b78d5522 |
| institution | DOAJ |
| issn | 0137-5075 2300-262X |
| language | English |
| publishDate | 2015-05-01 |
| publisher | Institute of Fundamental Technological Research Polish Academy of Sciences |
| record_format | Article |
| series | Archives of Acoustics |
| spelling | doaj-art-84bdcfe1419b491d80293626b78d55222025-08-20T02:39:13ZengInstitute of Fundamental Technological Research Polish Academy of SciencesArchives of Acoustics0137-50752300-262X2015-05-0140310.1515/aoa-2015-0043Automated Measurement System for Room Acoustics – an Initial Feasibility StudyBartłomiej Dariusz BORKOWSKI0Marek PLUTA1AGH University of Science and Technology, Department of Mechanics and Vibroacoustics Al. Mickiewicza 30, 30-059 Krakow, PolandAGH University of Science and Technology, Department of Mechanics and Vibroacoustics Al. Mickiewicza 30, 30-059 Krakow, PolandCurrently used procedures in room acoustics measurements are not automated. Particularly in medium-sized and large areas they require a lot of time and intensive labour which directly translates into an increase in the measurement cost. Introduction of an automated system would increase efficiency of the measurements, and therefore could present both practical and scientific benefit. The paper presents initial feasibility study for designing a system that permits the measurement of selected acoustic parameters for any choice of three-dimensional grid of measurement points throughout the volume of the room. The system will utilize an autonomous probe attached to a blimp, and will be able to measure and analyze acoustic characteristics of the rooms. The article discusses the initial choices of the system elements, starting from the general idea, through the mechanical design and control procedures, the software that controls positioning and flying of the probe, up to the automation of the measurement procedure and its possible impact on the acoustic field.https://acoustics.ippt.pan.pl/index.php/aa/article/view/1442acoustic measurementroom acousticsautomated measurement system. |
| spellingShingle | Bartłomiej Dariusz BORKOWSKI Marek PLUTA Automated Measurement System for Room Acoustics – an Initial Feasibility Study Archives of Acoustics acoustic measurement room acoustics automated measurement system. |
| title | Automated Measurement System for Room Acoustics – an Initial Feasibility Study |
| title_full | Automated Measurement System for Room Acoustics – an Initial Feasibility Study |
| title_fullStr | Automated Measurement System for Room Acoustics – an Initial Feasibility Study |
| title_full_unstemmed | Automated Measurement System for Room Acoustics – an Initial Feasibility Study |
| title_short | Automated Measurement System for Room Acoustics – an Initial Feasibility Study |
| title_sort | automated measurement system for room acoustics an initial feasibility study |
| topic | acoustic measurement room acoustics automated measurement system. |
| url | https://acoustics.ippt.pan.pl/index.php/aa/article/view/1442 |
| work_keys_str_mv | AT bartłomiejdariuszborkowski automatedmeasurementsystemforroomacousticsaninitialfeasibilitystudy AT marekpluta automatedmeasurementsystemforroomacousticsaninitialfeasibilitystudy |