Energy Recovery Strategies in CO2 Compression Using an Integrated Supercritical Rankine Cycle

One of the leading technologies for reducing industrial CO2 emissions is Carbon Capture and Storage (CCS). Existing publications address the high energy requirements of the capture process while overlooking the subsequent compression process required for CO2 transportation, which also exhibits inten...

Full description

Saved in:
Bibliographic Details
Main Authors: Panagiotis Kazepidis, Panos Seferlis, Athanasios I. Papadopoulos
Format: Article
Language:English
Published: AIDIC Servizi S.r.l. 2024-12-01
Series:Chemical Engineering Transactions
Online Access:https://www.cetjournal.it/index.php/cet/article/view/14999
Tags: Add Tag
No Tags, Be the first to tag this record!
_version_ 1850104470514434048
author Panagiotis Kazepidis
Panos Seferlis
Athanasios I. Papadopoulos
author_facet Panagiotis Kazepidis
Panos Seferlis
Athanasios I. Papadopoulos
author_sort Panagiotis Kazepidis
collection DOAJ
description One of the leading technologies for reducing industrial CO2 emissions is Carbon Capture and Storage (CCS). Existing publications address the high energy requirements of the capture process while overlooking the subsequent compression process required for CO2 transportation, which also exhibits intense energy needs. This work aims to investigate and compare the energy requirements of two alternative methods to the conventional process for pressurising captured CO2 to 150 bar. After the capture process, CO2 is typically at near atmospheric pressure, requiring multi-stage compression due to compressor limitations. After each compression stage, cooling is required to maintain the fluid close to the optimal temperature for further compression. The proposed alternative methods utilise the compressed CO2, which is in a supercritical state (sCO2), as the working fluid to recover heat that is available among the compression stages. One of the alternative methods uses sCO2 in an integrated open supercritical Rankine cycle (sRC) at each cooling stage. The other method, apart from the sRC, heats the CO2-rich liquid stream before the regeneration column of the capture process at the final compression stage. The compression processes are designed for a CO2 stream of 2,779 t/d, representing the typical captured CO2 mass flow from a 400 MW power plant. Results suggest that the case of combining sRC and the CO2-rich stream heating is the most energy-efficient among the tested cases, requiring 5.11 MW less than the sRC-only case and 4.31 MW less than the conventional compression case without intercooling.
format Article
id doaj-art-83f359bbc71744618243a7e8be03a32a
institution DOAJ
issn 2283-9216
language English
publishDate 2024-12-01
publisher AIDIC Servizi S.r.l.
record_format Article
series Chemical Engineering Transactions
spelling doaj-art-83f359bbc71744618243a7e8be03a32a2025-08-20T02:39:19ZengAIDIC Servizi S.r.l.Chemical Engineering Transactions2283-92162024-12-01114Energy Recovery Strategies in CO2 Compression Using an Integrated Supercritical Rankine CyclePanagiotis KazepidisPanos SeferlisAthanasios I. PapadopoulosOne of the leading technologies for reducing industrial CO2 emissions is Carbon Capture and Storage (CCS). Existing publications address the high energy requirements of the capture process while overlooking the subsequent compression process required for CO2 transportation, which also exhibits intense energy needs. This work aims to investigate and compare the energy requirements of two alternative methods to the conventional process for pressurising captured CO2 to 150 bar. After the capture process, CO2 is typically at near atmospheric pressure, requiring multi-stage compression due to compressor limitations. After each compression stage, cooling is required to maintain the fluid close to the optimal temperature for further compression. The proposed alternative methods utilise the compressed CO2, which is in a supercritical state (sCO2), as the working fluid to recover heat that is available among the compression stages. One of the alternative methods uses sCO2 in an integrated open supercritical Rankine cycle (sRC) at each cooling stage. The other method, apart from the sRC, heats the CO2-rich liquid stream before the regeneration column of the capture process at the final compression stage. The compression processes are designed for a CO2 stream of 2,779 t/d, representing the typical captured CO2 mass flow from a 400 MW power plant. Results suggest that the case of combining sRC and the CO2-rich stream heating is the most energy-efficient among the tested cases, requiring 5.11 MW less than the sRC-only case and 4.31 MW less than the conventional compression case without intercooling.https://www.cetjournal.it/index.php/cet/article/view/14999
spellingShingle Panagiotis Kazepidis
Panos Seferlis
Athanasios I. Papadopoulos
Energy Recovery Strategies in CO2 Compression Using an Integrated Supercritical Rankine Cycle
Chemical Engineering Transactions
title Energy Recovery Strategies in CO2 Compression Using an Integrated Supercritical Rankine Cycle
title_full Energy Recovery Strategies in CO2 Compression Using an Integrated Supercritical Rankine Cycle
title_fullStr Energy Recovery Strategies in CO2 Compression Using an Integrated Supercritical Rankine Cycle
title_full_unstemmed Energy Recovery Strategies in CO2 Compression Using an Integrated Supercritical Rankine Cycle
title_short Energy Recovery Strategies in CO2 Compression Using an Integrated Supercritical Rankine Cycle
title_sort energy recovery strategies in co2 compression using an integrated supercritical rankine cycle
url https://www.cetjournal.it/index.php/cet/article/view/14999
work_keys_str_mv AT panagiotiskazepidis energyrecoverystrategiesinco2compressionusinganintegratedsupercriticalrankinecycle
AT panosseferlis energyrecoverystrategiesinco2compressionusinganintegratedsupercriticalrankinecycle
AT athanasiosipapadopoulos energyrecoverystrategiesinco2compressionusinganintegratedsupercriticalrankinecycle