Study on the Impact of Combined Action of Temperature Differential and Freeze–Thaw Cycle on the Durability of Cement Concrete
As a primary construction material, concrete plays a vital role in the development of infrastructure, including bridges, highways, and large-scale buildings. In Northeast China, the structural integrity of concrete faces severe challenges due to freeze–thaw cycles and substantial diurnal temperature...
Saved in:
| Main Authors: | , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
MDPI AG
2025-05-01
|
| Series: | Buildings |
| Subjects: | |
| Online Access: | https://www.mdpi.com/2075-5309/15/9/1566 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | As a primary construction material, concrete plays a vital role in the development of infrastructure, including bridges, highways, and large-scale buildings. In Northeast China, the structural integrity of concrete faces severe challenges due to freeze–thaw cycles and substantial diurnal temperature variations. This study involved a thorough examination of concrete’s performance under varying numbers of temperature differential cycling (60 to 300) and freeze–thaw cycles (75 to 300). The results showed that both freeze–thaw and temperature differential cycling led to increasing mass loss with the number of cycles. Peak mass losses reached 3.1% and 1.2% under freeze–thaw and temperature differential cycles, respectively, while the combined action resulted in a maximum mass loss of 4.1%. The variation trends in dynamic elastic modulus and compressive strength differed depending on the environmental conditions. Under identical freeze–thaw cycling, both properties exhibited an initial increase followed by a decrease with increasing temperature differential cycles. After 120 temperature differential cycles, the dynamic modulus and compressive strength increased by 4.7–6.2% and 7.5–10.9%, respectively. These values returned to near their initial levels after 180 cycles and further decreased to reductions of 17.0–22.6% and 15.3–29.4% by the 300th cycle. In contrast, under constant temperature differential cycles, dynamic modulus and compressive strength showed a continuous decline with increasing freeze–thaw cycles, reaching maximum reductions of 5.0–11.5% and 18.1–31.8%, respectively. Notably, the combined effect of temperature differential and freeze–thaw cycles was significantly greater than the sum of their individual effects. Compared to the superposition of separate effects, the combined action amplified the losses in dynamic modulus and compressive strength by factors of up to 3.7 and 1.8, respectively. Additionally, the fatigue life of concrete subjected to combined temperature differential and freeze–thaw cycles followed a two-parameter Weibull distribution. Analysis of the <i>S-N<sub>f</sub></i> curves revealed that the coupled environmental effects significantly accelerated the deterioration of fatigue performance. |
|---|---|
| ISSN: | 2075-5309 |