Experimental Investigation of post-installed anchors’ behavior under axial tensile force
"In this research, the ultimate bond capacity of post-installed anchors for adhesives (three brands: HITRE10, ROX-GU80 and DUBELLF1331) and grouts (FLO-GROUT2) has been evaluated experimentally and compared with the reference cast-in-place anchors. In addition, a parametric study has been condu...
Saved in:
| Main Authors: | , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Erbil Polytechnic University
2023-09-01
|
| Series: | Polytechnic Journal |
| Subjects: | |
| Online Access: | https://polytechnic-journal.epu.edu.iq/home/vol13/iss1/22 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| _version_ | 1850215163684192256 |
|---|---|
| author | Deedar A. Hussein Sarkawt Asaad Sarkawt |
| author_facet | Deedar A. Hussein Sarkawt Asaad Sarkawt |
| author_sort | Deedar A. Hussein |
| collection | DOAJ |
| description | "In this research, the ultimate bond capacity of post-installed anchors for adhesives (three brands: HITRE10, ROX-GU80 and DUBELLF1331) and grouts (FLO-GROUT2) has been evaluated experimentally and
compared with the reference cast-in-place anchors. In addition, a parametric study has been conducted to
assess the effects of the anchor diameter (10, 12, 16 mm), anchor embedded length (5db,10db and 15db)
and the cleaning method on the adhesive and grouted anchors. Among the used three adhesive brands,
the anchor adhesive Brand “HIT-RE10” had the largest bond capacity. Furthermore, apart from the small
embedded length (5db), the experimental results showed that the ultimate bond capacity of the post
installed anchors was higher than the reference cast-in-place anchors. In the same embedded length
range (>5db), the average bond stress decreased with the increase in the embedment length. With respect
to the effect of the increase in the embedment length and the diameter parameters, the results showed
that there is a corresponding increase in the ultimate bond capacity in both the adhesive and the grout
anchors. For the cleaning method parameter in adhesive anchors, the cleaning with air only achieved a
higher ultimate bond capacity compared with cleaning using air plus wire brush; however, in grout
anchors, the cleaning using air plus wire brush produced the larger capacity. The results also showed that
cleaning the holes of the adhesive anchors by washing with water and wire brush produced the highest
ultimate bond capacity compared with the other two cleaning method. " |
| format | Article |
| id | doaj-art-7f69a8a2815943c9889361ffaabde1a1 |
| institution | OA Journals |
| issn | 2707-7799 |
| language | English |
| publishDate | 2023-09-01 |
| publisher | Erbil Polytechnic University |
| record_format | Article |
| series | Polytechnic Journal |
| spelling | doaj-art-7f69a8a2815943c9889361ffaabde1a12025-08-20T02:08:42ZengErbil Polytechnic UniversityPolytechnic Journal2707-77992023-09-01131230239https://doi.org/10.59341/2707-7799.1835Experimental Investigation of post-installed anchors’ behavior under axial tensile forceDeedar A. Hussein0Sarkawt Asaad Sarkawt1Department of civil Engineering, Erbil technical engineering college, Erbil polytechnic university, Erbil, Kurdistan Region, Iraq.Department of civil Engineering, Erbil technical engineering college, Erbil polytechnic university, Erbil, Kurdistan Region, Iraq."In this research, the ultimate bond capacity of post-installed anchors for adhesives (three brands: HITRE10, ROX-GU80 and DUBELLF1331) and grouts (FLO-GROUT2) has been evaluated experimentally and compared with the reference cast-in-place anchors. In addition, a parametric study has been conducted to assess the effects of the anchor diameter (10, 12, 16 mm), anchor embedded length (5db,10db and 15db) and the cleaning method on the adhesive and grouted anchors. Among the used three adhesive brands, the anchor adhesive Brand “HIT-RE10” had the largest bond capacity. Furthermore, apart from the small embedded length (5db), the experimental results showed that the ultimate bond capacity of the post installed anchors was higher than the reference cast-in-place anchors. In the same embedded length range (>5db), the average bond stress decreased with the increase in the embedment length. With respect to the effect of the increase in the embedment length and the diameter parameters, the results showed that there is a corresponding increase in the ultimate bond capacity in both the adhesive and the grout anchors. For the cleaning method parameter in adhesive anchors, the cleaning with air only achieved a higher ultimate bond capacity compared with cleaning using air plus wire brush; however, in grout anchors, the cleaning using air plus wire brush produced the larger capacity. The results also showed that cleaning the holes of the adhesive anchors by washing with water and wire brush produced the highest ultimate bond capacity compared with the other two cleaning method. "https://polytechnic-journal.epu.edu.iq/home/vol13/iss1/22 post installed anchors,epoxy,grout,average bond stress,pull-out test |
| spellingShingle | Deedar A. Hussein Sarkawt Asaad Sarkawt Experimental Investigation of post-installed anchors’ behavior under axial tensile force Polytechnic Journal post installed anchors, epoxy, grout, average bond stress, pull-out test |
| title | Experimental Investigation of post-installed anchors’ behavior under axial tensile force |
| title_full | Experimental Investigation of post-installed anchors’ behavior under axial tensile force |
| title_fullStr | Experimental Investigation of post-installed anchors’ behavior under axial tensile force |
| title_full_unstemmed | Experimental Investigation of post-installed anchors’ behavior under axial tensile force |
| title_short | Experimental Investigation of post-installed anchors’ behavior under axial tensile force |
| title_sort | experimental investigation of post installed anchors behavior under axial tensile force |
| topic | post installed anchors, epoxy, grout, average bond stress, pull-out test |
| url | https://polytechnic-journal.epu.edu.iq/home/vol13/iss1/22 |
| work_keys_str_mv | AT deedarahussein experimentalinvestigationofpostinstalledanchorsbehaviorunderaxialtensileforce AT sarkawtasaadsarkawt experimentalinvestigationofpostinstalledanchorsbehaviorunderaxialtensileforce |