Finite Element Analysis of Spline-Connecting Anti-roll Torsion Bar Based on ABAQUS
A spline-connecting anti-roll torsion bar was simulated by ABAQUS software, which was shown being correct and reliable by comparing the results with the experiment. With using of sub-model, the local stress distribution of the spline was obtained.The results indicated that simplifying the contact re...
Saved in:
| Main Authors: | , , , , |
|---|---|
| Format: | Article |
| Language: | zho |
| Published: |
Editorial Department of Electric Drive for Locomotives
2011-01-01
|
| Series: | 机车电传动 |
| Subjects: | |
| Online Access: | http://edl.csrzic.com/thesisDetails#10.13890/j.issn.1000-128x.2011.06.009 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | A spline-connecting anti-roll torsion bar was simulated by ABAQUS software, which was shown being correct and reliable by comparing the results with the experiment. With using of sub-model, the local stress distribution of the spline was obtained.The results indicated that simplifying the contact relation of the entirety model could reduce the computational cost and increase analysis efficiency, and the sub-model solution solved the problems of too much grid need to calculate, long calculate time and the poor convergence. The accurate stress results provided strong support for the fatigue analysis and the extraction of the fatigue failure mode of the torsion bar system. |
|---|---|
| ISSN: | 1000-128X |