The influence of thermal after-treatment on the adhesion of 3D prints on textile fabrics
3D printing belongs to the emerging technologies of our time. While it enables producing new structures and makes individualized products affordable, 3D printed objects still suffer from low production speed and often insufficient mechanical properties. Both these problems can be tackled by combinin...
Saved in:
| Main Authors: | , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
PUBLIA – SLUB Open Publishing
2020-11-01
|
| Series: | Communications in Development and Assembling of Textile Products |
| Subjects: | |
| Online Access: | https://journals.qucosa.de/cdatp/article/view/24 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | 3D printing belongs to the emerging technologies of our time. While it enables producing new structures and makes individualized products affordable, 3D printed objects still suffer from low production speed and often insufficient mechanical properties. Both these problems can be tackled by combining 3D printing with substrates prepared by conventional technologies, e.g. textile fabrics. In this case, the adhesion between both partners is most challenging and defines for which possible applications such composites are suitable. Here, we report on a new approach to increase the adhesion between 3D printed materials and warp knitted fabrics, showing that in some cases a thermal after-treatment, in the simplest case performed by ironing, is able to significantly increase the adhesion between both materials. |
|---|---|
| ISSN: | 2701-939X |