Hot Structure Flight Data of a Faceted Atmospheric Reentry Thermal Protection System

The second sharp-edged flight experiment is a faceted suborbital reentry body that enables low-cost in-flight reentry research. Its faceted thermal protection system consisting of only flat radiation-cooled thermal protection panels is cost-efficient since it saves dies, manpower, and storage. The c...

Full description

Saved in:
Bibliographic Details
Main Authors: Hannah Boehrk, Hendrik Weihs, Henning Elsäßer
Format: Article
Language:English
Published: Wiley 2019-01-01
Series:International Journal of Aerospace Engineering
Online Access:http://dx.doi.org/10.1155/2019/9754739
Tags: Add Tag
No Tags, Be the first to tag this record!
_version_ 1849410058151002112
author Hannah Boehrk
Hendrik Weihs
Henning Elsäßer
author_facet Hannah Boehrk
Hendrik Weihs
Henning Elsäßer
author_sort Hannah Boehrk
collection DOAJ
description The second sharp-edged flight experiment is a faceted suborbital reentry body that enables low-cost in-flight reentry research. Its faceted thermal protection system consisting of only flat radiation-cooled thermal protection panels is cost-efficient since it saves dies, manpower, and storage. The ceramic sharp leading edge has a 1 mm nose radius in order to achieve good aerodynamic behaviour of the vehicle. The maximum temperature measured during flight was 867°C just before transmission ended and was predicted with an accuracy of the order of 10%. The acreage thermal protection system is set up by 3 mm fiber-reinforced ceramic panels isolated by a 27 mm alumina felt from the substructure. The panel gaps are sealed by a ceramic seal. Part of the thermal protection system is an additional transpiration-cooling experiment in which nitrogen is exhausted through a permeable ceramic matrix composite to form a coolant film on the panel. The efficiencies at the maximum heat flux are 58% on the porous sample and 42% and 30% downstream of the sample in the wake. The transient load at each panel location is derived from the trajectory by oblique shock equations and subsequent use of a heat balance for both cooled and uncooled structures. The comparison to the heat balance HEATS reveals heat sinks in the attachment system while the concurrence with the measurement is good with only 8% deviation for the acreage thermal protection system. Aerodynamic control surfaces, i.e., canards, have been designed and made from a hybrid titanium and ceramic matrix composite structure.
format Article
id doaj-art-75ea699164fe451395d545443dc47ab5
institution Kabale University
issn 1687-5966
1687-5974
language English
publishDate 2019-01-01
publisher Wiley
record_format Article
series International Journal of Aerospace Engineering
spelling doaj-art-75ea699164fe451395d545443dc47ab52025-08-20T03:35:18ZengWileyInternational Journal of Aerospace Engineering1687-59661687-59742019-01-01201910.1155/2019/97547399754739Hot Structure Flight Data of a Faceted Atmospheric Reentry Thermal Protection SystemHannah Boehrk0Hendrik Weihs1Henning Elsäßer2Institute of Structures and Design, German Aerospace Center (Deutsches Zentrum für Luft- und Raumfahrt (DLR)), Pfaffenwaldring 38-40, D-70569 Stuttgart, GermanyInstitute of Structures and Design, German Aerospace Center (Deutsches Zentrum für Luft- und Raumfahrt (DLR)), Pfaffenwaldring 38-40, D-70569 Stuttgart, GermanyInstitute of Structures and Design, German Aerospace Center (Deutsches Zentrum für Luft- und Raumfahrt (DLR)), Pfaffenwaldring 38-40, D-70569 Stuttgart, GermanyThe second sharp-edged flight experiment is a faceted suborbital reentry body that enables low-cost in-flight reentry research. Its faceted thermal protection system consisting of only flat radiation-cooled thermal protection panels is cost-efficient since it saves dies, manpower, and storage. The ceramic sharp leading edge has a 1 mm nose radius in order to achieve good aerodynamic behaviour of the vehicle. The maximum temperature measured during flight was 867°C just before transmission ended and was predicted with an accuracy of the order of 10%. The acreage thermal protection system is set up by 3 mm fiber-reinforced ceramic panels isolated by a 27 mm alumina felt from the substructure. The panel gaps are sealed by a ceramic seal. Part of the thermal protection system is an additional transpiration-cooling experiment in which nitrogen is exhausted through a permeable ceramic matrix composite to form a coolant film on the panel. The efficiencies at the maximum heat flux are 58% on the porous sample and 42% and 30% downstream of the sample in the wake. The transient load at each panel location is derived from the trajectory by oblique shock equations and subsequent use of a heat balance for both cooled and uncooled structures. The comparison to the heat balance HEATS reveals heat sinks in the attachment system while the concurrence with the measurement is good with only 8% deviation for the acreage thermal protection system. Aerodynamic control surfaces, i.e., canards, have been designed and made from a hybrid titanium and ceramic matrix composite structure.http://dx.doi.org/10.1155/2019/9754739
spellingShingle Hannah Boehrk
Hendrik Weihs
Henning Elsäßer
Hot Structure Flight Data of a Faceted Atmospheric Reentry Thermal Protection System
International Journal of Aerospace Engineering
title Hot Structure Flight Data of a Faceted Atmospheric Reentry Thermal Protection System
title_full Hot Structure Flight Data of a Faceted Atmospheric Reentry Thermal Protection System
title_fullStr Hot Structure Flight Data of a Faceted Atmospheric Reentry Thermal Protection System
title_full_unstemmed Hot Structure Flight Data of a Faceted Atmospheric Reentry Thermal Protection System
title_short Hot Structure Flight Data of a Faceted Atmospheric Reentry Thermal Protection System
title_sort hot structure flight data of a faceted atmospheric reentry thermal protection system
url http://dx.doi.org/10.1155/2019/9754739
work_keys_str_mv AT hannahboehrk hotstructureflightdataofafacetedatmosphericreentrythermalprotectionsystem
AT hendrikweihs hotstructureflightdataofafacetedatmosphericreentrythermalprotectionsystem
AT henningelsaßer hotstructureflightdataofafacetedatmosphericreentrythermalprotectionsystem