Computational Fluid Dynamics Analysis into the Comparison of Resistance Characteristics Between DARPA Suboff and Modified U209 Types of Submarines

Submarines are required to have good performance, which is influenced by their type of hull, hull conditions, and operational conditions. This study compares the resistance between a Modified-U209 (U209) submarine and the DARPA Suboff. The former is an older hull geometry with both surface and subme...

Full description

Saved in:
Bibliographic Details
Main Authors: Ahmad Nasirudin, Sutiyo, Ardi Nugroho Yulianto, Eko Julianto, I Ketut Aria Pria Utama, Martin Renilson
Format: Article
Language:English
Published: MDPI AG 2025-06-01
Series:Sci
Subjects:
Online Access:https://www.mdpi.com/2413-4155/7/2/82
Tags: Add Tag
No Tags, Be the first to tag this record!
Description
Summary:Submarines are required to have good performance, which is influenced by their type of hull, hull conditions, and operational conditions. This study compares the resistance between a Modified-U209 (U209) submarine and the DARPA Suboff. The former is an older hull geometry with both surface and submerged operation considered, whereas the latter represents a modern nuclear-powered submarine designed for submerged operations only. The two geometries were scaled to give the same usable volume, and all results were non-dimensionalized using this to ensure consistency. A Computational Fluid Dynamics (CFD) method was utilized to predict resistance by employing the Reynolds-averaged Navier–Stokes (RANS) equations. The results show that the total resistance coefficient for the U209 bare hull is approximately 6% higher than the Suboff bare hull. When a casing was added to the U209 geometry the increase in total resistance coefficient was approximately 8%. The addition of the sail resulted in an increase in total resistance coefficient ranging from approximately 4% (Suboff sail added to U209) to approximately 14% (U209 sail added to U209). An existing empirical prediction technique was used to predict the resistance, with the total resistance coefficient predicted being consistently about 5% lower than the values obtained using CFD.
ISSN:2413-4155