Numerical Study of the Active Flow Control Effect on the Wind Turbine Blade Section Using a Trailing Edge Flap
ABSTRACT Wind turbines operating in unsteady and complex environments often encounter asymmetric and unsteady vortex flows on the suction side of the blade, leading to airflow separation and dynamic stall. These issues significantly impact the aerodynamic performance and energy efficiency of wind tu...
Saved in:
| Main Authors: | , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Wiley
2025-06-01
|
| Series: | Wind Energy |
| Subjects: | |
| Online Access: | https://doi.org/10.1002/we.70023 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | ABSTRACT Wind turbines operating in unsteady and complex environments often encounter asymmetric and unsteady vortex flows on the suction side of the blade, leading to airflow separation and dynamic stall. These issues significantly impact the aerodynamic performance and energy efficiency of wind turbines. Trailing edge flaps are an active flow control method to mitigate dynamic stall; however, there is a lack of research regarding the regulatory relationship between airfoil parameters, trailing edge flap oscillation angles, and aerodynamic parameters. To address this research gap, this numerical study employs a multiblock overlapping grid technique and a custom‐programmed method to simulate active flow control on an airfoil by coordinating the motion of the main wing and trailing edge flap during pitching oscillations. Aerodynamic parameters of airfoils were calculated to investigate the impact of trailing edge flap deflection direction, deflection amplitude, and other parameters on the wind turbine blade section airfoil thrust, torque, and aerodynamic characteristics under stall conditions. An optimized aerodynamic performance curve of the blade was produced. The results show that when a dynamic stall occurred and the wind speed was low, the lift coefficient of the airfoil can be increased by approximately 23% with the amplitude αamp1 = 40° and the same deflection direction; moreover, the tangential force and torque value on the blade concurrently increased. Adjusting the motion of the main wing and trailing edge flap reduced the thrust and load fluctuation of the blade by changing the flap amplitude value. Additionally, the operation efficiency of the wind turbine improved. These results can provide a reference for the active flow control and application of wind turbine flaps. |
|---|---|
| ISSN: | 1095-4244 1099-1824 |