Influence of methyl methacrylate as an acrylic binder on a green machining of alumina ceramics
Investigated the possibility of using methyl methacrylate (MMA) as an acrylic binder in the preparation of ceramic powder of alumina for pressing with the intention of improving machinability of alumina flakes. Compared the properties of the green bodies and the properties of their corresponding sin...
Saved in:
| Main Authors: | , , , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Engineering Society for Corrosion, Belgrade
2019-06-01
|
| Series: | Zaštita Materijala |
| Subjects: | |
| Online Access: | https://www.zastita-materijala.org/index.php/home/article/view/319 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | Investigated the possibility of using methyl methacrylate (MMA) as an acrylic binder in the preparation of ceramic powder of alumina for pressing with the intention of improving machinability of alumina flakes. Compared the properties of the green bodies and the properties of their corresponding sintered samples that are prepared with and without acrylic binder. The achieved higher density of green bodies with MMA (2.35 g/cm3) compared to green bodies without MMA (2.11 g/cm3) were formed under the optimal pressure of 60 MPa, indicating the improved packing of alumina powder with addition of acrylate. In the case of sintered samples, the porosities were increased, and the density and percentage of linear shrinkage were reduced. It has been shown that machining of green bodies, prepared with MMA, can be produced in the form of complex ceramic products of alumina like a screw with a nut and with great possibilities of commercial application. |
|---|---|
| ISSN: | 0351-9465 2466-2585 |