Novel Synthetic-Based Drilling Fluid through Enzymatic Interesterification of Canola Oil

Over the years, the oil industries have avoided aromatic, naphthenic, and paraffinic oils as drilling mud base fluids principally because of their detrimental environmental issues on pelagic and benthic marine ecosystems as a result of their toxicity and nonbiodegradability coupled with the possible...

Full description

Saved in:
Bibliographic Details
Main Authors: Anawe A. L. Paul, Folayan J. Adewale
Format: Article
Language:English
Published: Wiley 2018-01-01
Series:International Journal of Chemical Engineering
Online Access:http://dx.doi.org/10.1155/2018/6418090
Tags: Add Tag
No Tags, Be the first to tag this record!
_version_ 1850222560170475520
author Anawe A. L. Paul
Folayan J. Adewale
author_facet Anawe A. L. Paul
Folayan J. Adewale
author_sort Anawe A. L. Paul
collection DOAJ
description Over the years, the oil industries have avoided aromatic, naphthenic, and paraffinic oils as drilling mud base fluids principally because of their detrimental environmental issues on pelagic and benthic marine ecosystems as a result of their toxicity and nonbiodegradability coupled with the possible deterioration of the oil itself and the rubber parts of the drilling equipment because the aromatic hydrocarbons present in the oil have a tendency to dissolve/damage elastomers present in rubber. Hence, possible insights into how to chemically and/or physically produce synthetic base drilling fluids whose cuttings are nontoxic, readily biodegradable, environmentally friendly, and of nonpetroleum source become imperative. In this study, enzymatic interesterification of canola oil was done with ethanol by using enzyme lipase as catalyst under optimum conditions of temperature and pressure and the physicochemical properties of the produced ester were evaluated and compared with that of diesel and a synthetic hydrocarbon base fluid (SHBF). Results show that the specific gravity, kinematic viscosity, dynamic viscosity, and surface tension of canola oil were reduced by 5.50%, 94.74%, 95.03%, and 9.38%, respectively, upon enzymatic interesterification to conform to standard requirements. Similarly, increased |mud ability to pump fluids and possibility of cold temperature environment can be achieved with the reduction in pour point and cloud point, respectively, of the produced canola oil ester. Finally, the produced ester showed no aromatic content as confirmed from its FTIR analysis which indicates its nontoxicity, biodegradability, and environmental friendliness.
format Article
id doaj-art-6ec7fbbc2a0a44ec99dfb40efe283480
institution OA Journals
issn 1687-806X
1687-8078
language English
publishDate 2018-01-01
publisher Wiley
record_format Article
series International Journal of Chemical Engineering
spelling doaj-art-6ec7fbbc2a0a44ec99dfb40efe2834802025-08-20T02:06:19ZengWileyInternational Journal of Chemical Engineering1687-806X1687-80782018-01-01201810.1155/2018/64180906418090Novel Synthetic-Based Drilling Fluid through Enzymatic Interesterification of Canola OilAnawe A. L. Paul0Folayan J. Adewale1Department of Petroleum Engineering, College of Chemical and Petroleum Engineering, Covenant University, Ota, NigeriaDepartment of Petroleum Engineering, College of Chemical and Petroleum Engineering, Covenant University, Ota, NigeriaOver the years, the oil industries have avoided aromatic, naphthenic, and paraffinic oils as drilling mud base fluids principally because of their detrimental environmental issues on pelagic and benthic marine ecosystems as a result of their toxicity and nonbiodegradability coupled with the possible deterioration of the oil itself and the rubber parts of the drilling equipment because the aromatic hydrocarbons present in the oil have a tendency to dissolve/damage elastomers present in rubber. Hence, possible insights into how to chemically and/or physically produce synthetic base drilling fluids whose cuttings are nontoxic, readily biodegradable, environmentally friendly, and of nonpetroleum source become imperative. In this study, enzymatic interesterification of canola oil was done with ethanol by using enzyme lipase as catalyst under optimum conditions of temperature and pressure and the physicochemical properties of the produced ester were evaluated and compared with that of diesel and a synthetic hydrocarbon base fluid (SHBF). Results show that the specific gravity, kinematic viscosity, dynamic viscosity, and surface tension of canola oil were reduced by 5.50%, 94.74%, 95.03%, and 9.38%, respectively, upon enzymatic interesterification to conform to standard requirements. Similarly, increased |mud ability to pump fluids and possibility of cold temperature environment can be achieved with the reduction in pour point and cloud point, respectively, of the produced canola oil ester. Finally, the produced ester showed no aromatic content as confirmed from its FTIR analysis which indicates its nontoxicity, biodegradability, and environmental friendliness.http://dx.doi.org/10.1155/2018/6418090
spellingShingle Anawe A. L. Paul
Folayan J. Adewale
Novel Synthetic-Based Drilling Fluid through Enzymatic Interesterification of Canola Oil
International Journal of Chemical Engineering
title Novel Synthetic-Based Drilling Fluid through Enzymatic Interesterification of Canola Oil
title_full Novel Synthetic-Based Drilling Fluid through Enzymatic Interesterification of Canola Oil
title_fullStr Novel Synthetic-Based Drilling Fluid through Enzymatic Interesterification of Canola Oil
title_full_unstemmed Novel Synthetic-Based Drilling Fluid through Enzymatic Interesterification of Canola Oil
title_short Novel Synthetic-Based Drilling Fluid through Enzymatic Interesterification of Canola Oil
title_sort novel synthetic based drilling fluid through enzymatic interesterification of canola oil
url http://dx.doi.org/10.1155/2018/6418090
work_keys_str_mv AT anawealpaul novelsyntheticbaseddrillingfluidthroughenzymaticinteresterificationofcanolaoil
AT folayanjadewale novelsyntheticbaseddrillingfluidthroughenzymaticinteresterificationofcanolaoil