Design-Oriented transient stability analysis of LCC-HVDC inverter with DC voltage control under grid fault

Subsequent commutation failure (SCF) is an inherent issue for the line-commutated-converter based high voltage direct current (LCC-HVDC) in the receiving end. Nonlinear natures of LCC, such as the DC-AC conversion, commutation overlaps, relation between the transmitted power and grid voltage, etc. c...

Full description

Saved in:
Bibliographic Details
Main Authors: Zhiwei Lei, Junpeng Ma, Shunliang Wang, Ning Jiao, Tianqi Liu, Ruiting Xu
Format: Article
Language:English
Published: Elsevier 2025-08-01
Series:International Journal of Electrical Power & Energy Systems
Subjects:
Online Access:http://www.sciencedirect.com/science/article/pii/S0142061525003138
Tags: Add Tag
No Tags, Be the first to tag this record!
Description
Summary:Subsequent commutation failure (SCF) is an inherent issue for the line-commutated-converter based high voltage direct current (LCC-HVDC) in the receiving end. Nonlinear natures of LCC, such as the DC-AC conversion, commutation overlaps, relation between the transmitted power and grid voltage, etc. complicate the modeling and theoretical analysis for SCF under grid faults, which also poses challenges to the suppression of SCF. To address the above issues, the phase portraits analysis method is developed to depict the dynamics of SCF during grid faults. In the proposed analysis method, the large-signal model of the inverter is derived, hereafter, the dominant inducements of SCF, including control parameters, grid sag depth, and grid impedance are elaborated quantitatively. Moreover, an adaptive PI controller is designed for DC voltage control in both steady state and grid fault conditions, which can ensure the safe operation of the inverter under various degrees of grid fault. Then parametric boundaries for maintaining the highest DC voltage during transients are also obtained. Experimental results verify the effectiveness of the analysis and the proposed strategy.
ISSN:0142-0615