Influence of elevation angle of tundish filter on removal rate of impurity in molten steel
Abstract To investigate the effect of the filter device on the cleanliness of molten steel and the flow field distribution within the tundish. The tundish filters were designed into five groups of pores with 20°, 25°, 30°, 35° and 40° elevation angles, and the flow field distribution and impurity re...
Saved in:
| Main Authors: | Aiwei Lv, Guoqiang Ding, Xudong Luo |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Nature Portfolio
2025-01-01
|
| Series: | Scientific Reports |
| Subjects: | |
| Online Access: | https://doi.org/10.1038/s41598-024-84999-5 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Similar Items
-
Numerical simulation and application of argon blowing from tundish cover for bloom continuous casting
by: Wu C.-H., et al.
Published: (2023-01-01) -
Non-Uniform Thermal Transfer of Molten Steel and Its Effect on Inclusion Particles Removal Behavior in Continuous Casting Tundish
by: Zhixiao Zhang, et al.
Published: (2025-02-01) -
Physical and mathematical modeling of inclusion removal with gas bottom-blowing in continuous casting tundish
by: Zhang M.J., et al.
Published: (2011-01-01) -
Influence of Casting on Two Strands in Three-Strand Tundish on Length of Transient Areas
by: Peter Šmigura, et al.
Published: (2024-09-01) -
The Development of an Optimized Impact Pad for a Six-Strand Tundish Using CFD Simulations
by: Peter Demeter, et al.
Published: (2025-05-01)