One-Pot Hydrothermal Synthesis, Characterization, and Desulfurization Performance of ZnFe2O4/AC Composites

ZnFe2O4/AC composites were prepared by the one-pot hydrothermal method using the activated carbon (AC) as a carrier. The synthesis conditions were optimized by a single-factor experiment. The structural, textural, and surface properties of the adsorbent have been comprehensively characterized by sca...

Full description

Saved in:
Bibliographic Details
Main Authors: Hui-qiang Wang, Ming-hua Liu, Xin Luo, Yi-fan Liu, Fei-er Chen, Yuan-cai Lv
Format: Article
Language:English
Published: Wiley 2018-01-01
Series:Journal of Nanotechnology
Online Access:http://dx.doi.org/10.1155/2018/9417067
Tags: Add Tag
No Tags, Be the first to tag this record!
Description
Summary:ZnFe2O4/AC composites were prepared by the one-pot hydrothermal method using the activated carbon (AC) as a carrier. The synthesis conditions were optimized by a single-factor experiment. The structural, textural, and surface properties of the adsorbent have been comprehensively characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier-transform infrared (FT-IR) spectroscopy, Brunauer–Emmett–Teller (BET) measurements, and X-ray photoelectron spectroscopy (XPS) analysis. The SO2 removal capacities of the composites were investigated via testing the adsorption capacity at the self-made desulfurization equipment. The results show that the adsorption capacity of ZnFe2O4/AC composites is much higher than that of the AC and ZnFe2O4 samples, respectively. The composite overcomes the disadvantages of the traditional sintering, showing a very high desulfurization performance. The breakthrough time was 147 min, and the sulfur adsorption capacity could reach 23.67% in the desulfurization performance test.
ISSN:1687-9503
1687-9511