SIMULATION OF ASSEMBLY MANUFACTURABILITY OF PRODUCTS DESIGN IN INTEGRATED CAD/CAM SYSTEM
Some questions on the assessment and development of the products design fabricability in the integrated CAD/CAM system are studied. The analysis procedure of the design assembly manufacturability by means of DFMA technique is closely considered. The assembly manufacturability simulation and assessme...
Saved in:
| Main Author: | |
|---|---|
| Format: | Article |
| Language: | Russian |
| Published: |
Don State Technical University
2012-02-01
|
| Series: | Advanced Engineering Research |
| Subjects: | |
| Online Access: | https://www.vestnik-donstu.ru/jour/article/view/468 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | Some questions on the assessment and development of the products design fabricability in the integrated CAD/CAM system are studied. The analysis procedure of the design assembly manufacturability by means of DFMA technique is closely considered. The assembly manufacturability simulation and assessment of some products design versions are exemplified. |
|---|---|
| ISSN: | 2687-1653 |