Exploring How Dopants Strengthen Metal-Ni/Ceramic-Al<sub>2</sub>O<sub>3</sub> Interface Structures at the Atomic and Electronic Levels
The metal-based/ceramic interface structure is a key research focus in science, and addressing the stability of the interface has significant scientific importance as well as economic value. In this project, the work of adhesion, heat of segregation, electronic structure, charge density, and density...
Saved in:
| Main Authors: | , , , , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
MDPI AG
2025-04-01
|
| Series: | Molecules |
| Subjects: | |
| Online Access: | https://www.mdpi.com/1420-3049/30/9/1990 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | The metal-based/ceramic interface structure is a key research focus in science, and addressing the stability of the interface has significant scientific importance as well as economic value. In this project, the work of adhesion, heat of segregation, electronic structure, charge density, and density of states for doped-M (M = Ti, Mg, Cu, Zn, Si, Mn, or Al) Ni (111)/Al<sub>2</sub>O<sub>3</sub> (0001) interface structures are studied using first-principle calculation methods. The calculation results demonstrate that doping Ti and Mg can increase the bonding strength of the Ni–Al<sub>2</sub>O<sub>3</sub> interface by factors of 3.4 and 1.5, respectively. However, other dopants, such as Si, Mn, and Al, have a negative effect on the bonding of the Ni–Al<sub>2</sub>O<sub>3</sub> interface. As a result, the alloying elements may be beneficial to the bonding of the Ni–Al<sub>2</sub>O<sub>3</sub> interface, but they may also play an opposite role. Moreover, the Ti and Mg dopants segregate from the matrix and move to the middle position of the Ni–Al<sub>2</sub>O<sub>3</sub> interface during relaxation, while other dopants exhibit a slight segregation and solid solution in the matrix. Most remarkably, the segregation behavior of Ti and Mg induced electron transfer to the middle of the interface, thereby increasing the charge density of the Ni–Al<sub>2</sub>O<sub>3</sub> interface. For the optimal doped-Ti Ni–Al<sub>2</sub>O<sub>3</sub> interface, bonds of Ti–O and Ti–Ni are found, which indicates that the dopant Ti generates stable compounds in the interface region, acting as a stabilizer for the interface. Consequently, selecting Ti as an additive in the fabrication of metal-based ceramic Ni–Al<sub>2</sub>O<sub>3</sub> composites will contribute to prolonging the service lifetime of the composite. |
|---|---|
| ISSN: | 1420-3049 |