Microstructure and elevated temperature mechanical properties of bimetal part fabricated by laser powder bed fusion of AlSi10Mg on rolled AA6061-T651

Microstructure and elevated temperature mechanical properties of bimetal part fabricated by laser powder bed fusion of AlSi10Mg on rolled AA6061-T651

This study employed laser powder bed fusion (LPBF) to deposit AlSi10Mg onto rolled AA6061-T651, aiming to evaluate the microstructure and mechanical performance of the resulting bimetallic structure. The microstructure was characterized using scanning electron microscopy (SEM), energy dispersive spe...

Full description

Saved in:
Bibliographic Details
Main Authors: Ibrahim H. ZainElabdeen, Rehan Umer, Wesley J. Cantwell, James Weston, Kamran A. Khan
Format: Article
Language:English
Published: Elsevier 2025-08-01
Series:Materials & Design
Subjects:
LPBF
Bimetal
Marangoni effect
Interfacial characteristics
High temperatures
Heat treatment
Online Access:http://www.sciencedirect.com/science/article/pii/S0264127525007476
Tags: Add Tag
No Tags, Be the first to tag this record!
Description
Summary:This study employed laser powder bed fusion (LPBF) to deposit AlSi10Mg onto rolled AA6061-T651, aiming to evaluate the microstructure and mechanical performance of the resulting bimetallic structure. The microstructure was characterized using scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), electron backscatter diffraction (EBSD), and micro-computed tomography (µ-CT). Mechanical properties were assessed via nanoindentation and uniaxial tensile testing at room temperature and elevated temperatures up to 250 °C. The bimetal underwent three heat-treatment cycles: stress relief (SR), solution heat treatment followed by direct aging (T6), and a combined SR and T6 treatment. A robust, defect-free interface (∼70 µm thick) was observed, driven by Marangoni convection, resulting in intermixing. The mechanical response of the bimetal was governed by the weaker alloy at all temperatures. At room temperature and 100 °C, fractures occurred on the AA6061 side, whereas at higher temperatures, failure shifted to the AlSi10Mg side due to its greater thermal softening. Heat treatments improved ductility but reduced strength and nanohardness. Overall, these findings demonstrate LPBF’s effectiveness in producing strong metallurgical bonds between dissimilar aluminum alloys, offering promising solutions for structural repair and multi-material designs in applications demanding reliability at both ambient and elevated temperatures.
ISSN:0264-1275

Similar Items