Bond-Slip Behavior Between C-Shaped Steel and Foamed Concrete in CTS Composite Structural Members
The bond-slip behavior between cold-formed thin-walled steel (CTS) and foamed concrete (FC) is a critical issue in the mechanical performance of FC-filled CTS composite wall structures. Thus, this study provides experimental and theoretical research on the bond-slip behavior between CTS and FC. A to...
Saved in:
| Main Authors: | , , , , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
MDPI AG
2024-11-01
|
| Series: | Buildings |
| Subjects: | |
| Online Access: | https://www.mdpi.com/2075-5309/14/12/3751 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | The bond-slip behavior between cold-formed thin-walled steel (CTS) and foamed concrete (FC) is a critical issue in the mechanical performance of FC-filled CTS composite wall structures. Thus, this study provides experimental and theoretical research on the bond-slip behavior between CTS and FC. A total of eleven specimens were tested using push-out configurations, considering the number of web holes, foamed concrete (FC) strength, anchorage length, and CTS section splice form. A constitutive model for bond-slip was proposed, and the regression formulas for accurately predicting the characteristic bond strength between CTS and foamed concrete were established. A finite element model was developed to investigate the bond-slip mechanism at the interface between CTS and FC. The bond-slip constitutive model accurately fits the experimental and finite element results. The results indicate that the ultimate bond strength of the specimens increases with the number of web holes; when the number of web holes reaches two, the ultimate bond strength is 155.4% of that of the non-perforated specimens. As the concrete strength increases from 3.43 MPa to 11.26 MPa, the ultimate bond strength of specimens with two web holes improves by 23.1%, while non-perforated specimens have a 54.7% enhancement. When the anchorage length is extended from 200 mm to 400 mm, the ultimate bond strength decreases by 29.3%. Additionally, when steel sections are joined in a double-span I form, the bond strength increases by 91.6% and 95.8% compared to the single-span form and the double-span box form, respectively. |
|---|---|
| ISSN: | 2075-5309 |