GEOMETRIC DESIGN, ADDITIVE PRODUCTION AND 3D SCANNING OF A HELICAL GEAR PAIR
A helical gear pair was deisgned and CAD modelled by computational way. After the assembly simulation the models were produced by additive technology. The Fused Deposition Modeling (FDM) technology was selected for the 3D printing that is widely used for gear production with plastic material. The...
Saved in:
| Main Authors: | , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Academica Brancusi
2022-12-01
|
| Series: | Fiabilitate şi Durabilitate |
| Subjects: | |
| Online Access: | https://www.utgjiu.ro/rev_mec/mecanica/pdf/2022-02/02_S%C3%A1ndor%20BODZ%C3%81S,%20D%C3%A1niel%20NEMES-%20GEOMETRIC%20DESIGN,%20ADDITIVE%20PRODUCTION.pdf |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | A helical gear pair was deisgned and CAD modelled by computational way. After the
assembly simulation the models were produced by additive technology. The Fused Deposition
Modeling (FDM) technology was selected for the 3D printing that is widely used for gear
production with plastic material. The applied scanner can register the surface points of the
workpiece with the projection of the structured light for the object and the usage of two calibrated
cameras. Using of the 3D scanning we could inspect the geometric accuracy of the gear pair
(pinion and gear) in comparison with the CAD models. |
|---|---|
| ISSN: | 1844-640X 2344-3669 |