Effect of Sr-P Interaction on the Microstructure and Tensile Properties of A413.0 Type Alloys
The present study was performed on low magnesium A413.0 type alloys. The results show that strontium (Sr) is mainly concentrated in the silicon particles. Overmodification occurs when Sr precipitates in the form of Al2SrSi2, which takes place over a wide range of temperatures. The first peak occurs...
Saved in:
| Main Authors: | A. M. Samuel, H. W. Doty, S. Valtierra, F. H. Samuel |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Wiley
2016-01-01
|
| Series: | Advances in Materials Science and Engineering |
| Online Access: | http://dx.doi.org/10.1155/2016/7691535 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Similar Items
-
Effect of Aluminum Addition on the Microstructure, Tensile Properties, and Fractography of Cast Mg-Based Alloys
by: M. H. Abdelaziz, et al.
Published: (2017-01-01) -
Microstructures and tensile properties of Mg-2Zn-0.8Sr-0.2Ca alloy extruded at relatively slow speed and low temperature
by: Yang A., et al.
Published: (2022-01-01) -
Mechanical Performance of Zr-Containing 354-Type Al-Si-Cu-Mg Cast Alloy: Role of Additions and Heat Treatment
by: M. H. Abdelaziz, et al.
Published: (2018-01-01) -
Flavouring Group Evaluation 413 (FGE.413): Naringenin
by: EFSA Panel on Food Additives and Flavourings (FAF), et al.
Published: (2024-05-01) -
The Effect of Quenching and Partitioning (Q&P) Process on the Structural and Mechanical Properties of AISI 4130 Steel
by: S. Hossain Reza, et al.
Published: (2022-11-01)