Application of low frequency vibration to the turning of ultra-high molecular weight polyethylene
Medical implant manufacturing is a growing sector and therefore requires improved manufacturing practices. In the case of total hip arthroplasty, the most challenging component to meet the ISO standard (ISO 7206-2:2011) is the acetabular liner, often made from ultra-high molecular weight polyethylen...
Saved in:
| Main Authors: | , , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Taylor & Francis Group
2025-12-01
|
| Series: | Advanced Manufacturing: Polymer & Composites Science |
| Subjects: | |
| Online Access: | https://www.tandfonline.com/doi/10.1080/20550340.2025.2449631 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | Medical implant manufacturing is a growing sector and therefore requires improved manufacturing practices. In the case of total hip arthroplasty, the most challenging component to meet the ISO standard (ISO 7206-2:2011) is the acetabular liner, often made from ultra-high molecular weight polyethylene (UHMWPE). UHMWPE machining is associated with several manufacturing challenges, including swarf control. This research used low frequency vibration (LFV), an intermittent cutting process and supercritical CO2 (scCO2) to aid chip segmentation and prevent swarf nesting. Machining trials have demonstrated a significant reduction in swarf nesting relative to a traditional process (91% reduction from LFV and 98% reduction when using LFV and scCO2). The surface roughness (Ra) also had an indirect improvement from using LFV (53% reduction on the inner hemisphere), leading to all parts meeting the roughness requirement of ISO 7206-2:2011. The results have demonstrated machinability benefits for UHMWPE, reducing the operator intervention required and component scrap rates. |
|---|---|
| ISSN: | 2055-0340 2055-0359 |