Research on the Key Technologies of Parallel Operation for Full Power Wind Power Converter
It presented a design scheme of low voltage, large capacity, high power density and high reliability converter for direct drive full power wind power converter. Power modules were used in parallel to enlarge the capacity of single converter, dynamic circulation current between parallel modules was s...
Saved in:
| Main Authors: | LI Baoguo, CHEN Yanping, JIANG Yunfu, GAO Haiyou, LIU Min, LU Shengwen |
|---|---|
| Format: | Article |
| Language: | zho |
| Published: |
Editorial Office of Control and Information Technology
2016-01-01
|
| Series: | Kongzhi Yu Xinxi Jishu |
| Subjects: | |
| Online Access: | http://ctet.csrzic.com/thesisDetails#10.13889/j.issn.2095-3631.2016.04.008 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Similar Items
-
Development of Power Assembly Technology for Wind Power Converters
by: CHEN Yanping, et al.
Published: (2017-01-01) -
Technology Status and Development of Wind Power Converters
by: FENG Jianghua
Published: (2013-01-01) -
Control Strategy for Power Sharing in Input-Parallel and Output-Parallel Connected DC-DC Converters
by: Negar Amoozadeh, et al.
Published: (2023-03-01) -
Development and Test of the 1 700 V/2 400 A IGBT Module for Wind Power Converter
by: LI Xin, et al.
Published: (2017-01-01) -
Design of the IGBT Snubber Circuit for Megawatt Level Wind Power Module
by: ZHAI Long, et al.
Published: (2016-01-01)