Effect of open die forging and cooling rate on the precipitation of secondary phases and corrosion properties of a cast UNS S32760 super duplex stainless steel

Effect of open die forging and cooling rate on the precipitation of secondary phases and corrosion properties of a cast UNS S32760 super duplex stainless steel

This study investigates the effect of hot plastic deformation on the precipitation kinetics of secondary phases in cast UNS S32760 super duplex stainless steel (SDSS). Due to their dual-phase morphology and composition, the SDSS are characterized by a favourable compromise between corrosion resistan...

Full description

Saved in:

Bibliographic Details
Main Authors:	E. Pitacco, R. Bertolini, E. Ghinatti, L. Pezzato, C. Gennari, I. Calliari, M. Pigato
Format:	Article
Language:	English
Published:	Elsevier 2024-11-01
Series:	Journal of Materials Research and Technology
Subjects:	Super duplex stainless steel Open die forging Sensitization Secondary phase precipitation Continuous cooling Dynamic recrystallization
Online Access:	http://www.sciencedirect.com/science/article/pii/S2238785424027613
Tags:	Add Tag No Tags, Be the first to tag this record!

Similar Items

Microstructural and Mechanical Characterization of the Laser Beam Welded SAF 2507 Super-Duplex Stainless Steel
by: Beáta Šimeková, et al.
Published: (2024-10-01)

Effect of Solidification Cooling Rate on the Microstructure Evolution and Corrosion Resistance of 2507 Super Duplex Stainless Steel
by: SHEN Chu, ZOU De - ning, ZHAO Jie, CHEN Yang
Published: (2021-04-01)

Microstructure and properties of UNS S32750 super-duplex stainless steels processed by hot isostatic pressing
by: SHANG Feng, et al.
Published: (2022-12-01)

Microstructural and Electrochemical Analysis of the Physically Simulated Heat-Affected Zone of Super-Duplex Stainless Steel UNS S32750
by: Francisco Magalhães dos Santos, et al.
Published: (2024-12-01)

Analysis of Surface Roughness and Machine Learning-Based Modeling in Dry Turning of Super Duplex Stainless Steel Using Textured Tools
by: Shailendra Pawanr, et al.
Published: (2025-06-01)

Cooling of Duplex Stainless‐Steel Bars With Different Water and Air Impinging Jet Flow Rates
by: Pavel Romanov, et al.
Published: (2025-04-01)

Increasing the efficiency of forging tools by thermal diffusion boronizing
by: Željko Stojanović, et al.
Published: (2017-03-01)

Effects of cold rolling on precipitation, microstructure and mechanical properties of super-ferritic stainless steels
by: Ling-Yun Du, et al.
Published: (2025-09-01)

Hot Deformation Behaviors and Dynamic Softening Mechanisms of As-Cast XM-19 Super Austenitic Stainless Steel
by: Lujun Cao, et al.
Published: (2025-03-01)

The efficiency of trimethylamon iodide as a corrosion inhibitor for welded joint of duplex stainless steel UNS S31803
by: Lucas Menezes de Souza, et al.
Published: (2024-11-01)

Determination of Diffusion Coefficients of Nickel and Vanadium into Stainless and Duplex Steel and Titanium
by: Šárka Vávrová, et al.
Published: (2024-12-01)

Effect of manganese addition on resistance to pitting corrosion of duplex stainless steel S32205
by: ZHENG Jian-chao, et al.
Published: (2019-02-01)

Effect of holding time on improving the microstructure and mechanical properties of die-forged AZ80-Ce magnesium alloys
by: Tianyi Ni, et al.
Published: (2024-11-01)

Low temperature nitriding behavior in annealed 2205 duplex stainless steel
by: Kai Lei, et al.
Published: (2024-12-01)

The hydrogen embrittlement sensitivity of duplex stainless steel with different phase fractions evaluated by in-situ mechanical testing
by: Margo Cauwels, et al.
Published: (2020-01-01)

BOUNDARY ELEMENT DETERMINATION OF STRAIN UNIFORM DISTRIBUTION CONDITIONS IN FORGINGS PRODUCED UNDER BROACHING BY RADIAL ROLLING-IMPRESSION DIES
by: Armenak V. Vovchenko
Published: (2012-08-01)

Investigating the correlation of microstructure with stress corrosion cracking of the high-temperature heat treated 2205 duplex stainless steel
by: Yue Pan, et al.
Published: (2025-03-01)

Characterization and Modelling of Microstructure Evolution and Flow Stress of Single-Phase Austenite and Ferrite Phases in Duplex Stainless Steels
by: Holger Brüggemann, et al.
Published: (2025-01-01)

Selective laser melting of 2507 duplex stainless steel: Effect of energy density on microstructure and corrosion resistance
by: Aofei Wang, et al.
Published: (2024-11-01)

Improved strength-plasticity in a lean duplex stainless steel through multiple cold rolling and short-term annealing
by: Jiale Zhang, et al.
Published: (2025-07-01)

Research Status on Microstructure and Localized Corrosion Resistance of Ferrite/Austenitic Duplex Stainless Steels
by: ZHANG Zhi-qiang, JING Hong-yang, XU Lian-yong, ZHANG Tian-gang, Xu Yu-tong, Bai Yu-jie
Published: (2021-01-01)

Effect of polarization potential on tribocorrosion behavior of duplex stainless steel UNS S32205 in NaCl solution
by: Jomar José Knaip Ribeiro, et al.
Published: (2025-05-01)

Influence of laser beam welding parameters on local mechanical properties of duplex stainless steel joints
by: Pavel Kovačócy, et al.
Published: (2024-12-01)

Microstructural Evolution of UNS S32205 Duplex Stainless Steel During Cold Rolling and Subsequent Annealing
by: C. Gauss, et al.
Published: (2025-02-01)

Assessment of Impulse Noise Hazard and the Use of Hearing Protection Devices in Workplaces where Forging Hammers are Used
by: Rafał MŁYŃSKI, et al.
Published: (2014-12-01)

Duplex γ/α-phase evolution of biocompatible high-nitrogen stainless steel in additive manufacturing
by: Yufeng Tao, et al.
Published: (2025-09-01)

Effect of forging sequence and heat treatment on microstructure of high-duty power-plant shaft made of Cr-Mo ultra-high strength steel
by: Skubisz P., et al.
Published: (2023-01-01)

Effect of Copper on the Corrosion Resistance of Super Austenitic StainlessSteel in Flue Gas Desulfurization Environment
by: LI Bing-bing, CHEN Hai-tao, LANG Yu-ping, QU Hua-peng, FENG Han-qiu, TIAN Zhi-ling, CHEN Qing-ming
Published: (2021-08-01)

Surface Cracking in 05Cr17Ni4Cu4Nb Precipitation-Hardened Stainless Steel During Secondary Forging： Mechanisms and Solutions
by: Zhao　Jiali, Xin　Ruishan, Yu　Zhanyang, Cao　Chenxing, Xue　Feng, He　Yudong, Zhou　Peng
Published: (2025-08-01)

Physically simulated heat-affected zones of 2101 lean duplex stainless steel: microstructure, corrosion behavior, and DICTRA® analysis at different cooling rates
by: C.L. Kugelmeier, et al.
Published: (2025-07-01)

Study on microstructure and properties evolution of duplex stainless steel powders by high-energy ball milling
by: Wenqing Sheng, et al.
Published: (2024-11-01)

Effect of Post-Heat Treatment on the Mechanical Properties and Corrosion Behavior of Duplex Stainless Steel Fabricated by Wire Arc Additive Manufacturing
by: Long Zhang, et al.
Published: (2024-06-01)

Stamping of forgings with side outlets of tee-type in a split tool
by: V. V. Gryaznov, et al.
Published: (2025-06-01)

Study of weld bead geometry for GMAW additive manufacturing of duplex stainless steel
by: Wang Huifeng, et al.
Published: (2025-01-01)

Effect of mode of metal transfer on corrosion properties of duplex stainless steel welding
by: Chintan Bahadursinh Gohil, et al.
Published: (2025-03-01)

Evolution of Microstructure, Tensile Mechanical and Corrosion Properties of a Novel Designed TRIP-Aided Economical 19Cr Duplex Stainless Steel After Aging Treatment
by: Xi Shi, et al.
Published: (2025-04-01)

An assessment of composite repair system in offshore platform for corroded circumferential welds in super duplex steel pipe
by: Silvio de Barros, et al.
Published: (2018-04-01)

Directions of development and application of plasma nitriding in industry
by: Željko Stojanović, et al.
Published: (2022-09-01)

The Influence of Physical Properties of C55 Alloy on Geometry of Flow in the Process of Shaping
by: M. Nabrdalik, et al.
Published: (2024-04-01)

Numerical simulation of cold forging process to investigate folding defect in enclosed dies
by: Payman Abhari
Published: (2017-10-01)