Sandwiching textiles with FDM Printing
3D printing on textile fabrics has been investigated intensively during the last years. A critical factor is the adhesion between the printed polymer and the textile fabric, limiting the potential areas of application. Especially safety-related applications, e.g. stab-resistant textile/polymer comp...
Saved in:
| Main Authors: | , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
PUBLIA – SLUB Open Publishing
2023-03-01
|
| Series: | Communications in Development and Assembling of Textile Products |
| Subjects: | |
| Online Access: | https://cdatp.journals.qucosa.de/cdatp/article/view/110 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | 3D printing on textile fabrics has been investigated intensively during the last years. A critical factor is the adhesion between the printed polymer and the textile fabric, limiting the potential areas of application. Especially safety-related applications, e.g. stab-resistant textile/polymer composites, need to show reliable adhesion between both components to serve their purpose. Here we investigate the possibility of sandwiching textiles between 3D-printed layers, produced by fused deposition modeling (FDM). We show that adding nubs to the lower 3D-printed layers stabilizes the inner textile fabric and suggest future constructive improvements to further enhance the textile-polymer connection.
|
|---|---|
| ISSN: | 2701-939X |