4D printing of multiscale filler–reinforced thermoplastic polyurethane nanocomposites with electro-activated shape memory properties
Four-dimensional printing of shape memory materials has been developed to dynamically control the shapes of printed structures for applications such as self-deployable structures, actuators, and sensors. Herein, a novel electro-activated shape memory nanocomposite material for the selective laser si...
Saved in:
| Main Authors: | , , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Taylor & Francis Group
2025-12-01
|
| Series: | Virtual and Physical Prototyping |
| Subjects: | |
| Online Access: | https://www.tandfonline.com/doi/10.1080/17452759.2025.2474537 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | Four-dimensional printing of shape memory materials has been developed to dynamically control the shapes of printed structures for applications such as self-deployable structures, actuators, and sensors. Herein, a novel electro-activated shape memory nanocomposite material for the selective laser sintering (SLS) process is developed. The nanocomposite powder incorporates a new type of multiscale hybrid filler, consisting of carbon fibres and carbon nanotubes (CNTs), with CNT-coated thermoplastic polyurethane nanocomposite powders. The shape recovery process of the nanocomposite with a 20 wt% hybrid-filler addition is almost four times faster when triggered by electric currents than that triggered by the direct heating method and exhibits a higher shape recovery ratio. A remotely and selectively controlled smart component is fabricated to demonstrate the potential applications of the novel nanocomposites. This work provides a promising solution to achieve function–structure integration through SLS for future high-tech applications. |
|---|---|
| ISSN: | 1745-2759 1745-2767 |