Tensile and creep properties of small specimens of reduced-activation ferritic steel F82H, and the correlation to standard specimen data [version 1; peer review: 2 approved, 1 approved with reservations]
Background A reduced-activation ferritic/martensitic (RAFM) steel, F82H steel, is the primary candidate structural material for fusion reactor blanket. Small specimen test technique is essential to develop the blanket materials using limited irradiation volume in high flux neutron field. An internat...
Saved in:
| Main Authors: | , , , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
F1000 Research Ltd
2024-07-01
|
| Series: | Nuclear Science and Technology Open Research |
| Subjects: | |
| Online Access: | https://nstopenresearch.org/articles/2-56/v1 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| _version_ | 1850108459212603392 |
|---|---|
| author | Jingjie Shen Takuya Nagasaka Taichiro Kato Masami Ando Hiroyasu Tanigawa Takashi Nozawa |
| author_facet | Jingjie Shen Takuya Nagasaka Taichiro Kato Masami Ando Hiroyasu Tanigawa Takashi Nozawa |
| author_sort | Jingjie Shen |
| collection | DOAJ |
| description | Background A reduced-activation ferritic/martensitic (RAFM) steel, F82H steel, is the primary candidate structural material for fusion reactor blanket. Small specimen test technique is essential to develop the blanket materials using limited irradiation volume in high flux neutron field. An international collaboration activity “Towards the Standardization of Small Specimen Test Techniques for Fusion Applications” has been initiated under the framework of the International Atomic Energy Agency Coordinated Research Project for Phase I from 2017 to 2021, and Phase II from 2022 to 2026. The present paper reports the preliminary results on tensile and creep tests as a summary of the above Phase I activity. Methods Tensile and creep tests were conducted at 550 and 650°C, using flat-plate SSJ type small specimens with various gauge thickness ranged from 0.14 to 1.2 mm, while gauge length and width are 5 and 1.2 mm, respectively. In addition, round bar type standard specimens with a gauge geometry of 6 mm in diameter and 30 mm in length was also tested for comparison. Results Tensile yield stress, ultimate tensile strength and uniform elongation were independent of the gauge thickness of SSJ specimens, and agreed with the data from the standard size specimens. On the other hand, total elongation was decreased with decreasing the thickness. In creep tests, rupture time was decreased with decreasing the gauge thickness of SSJ specimens. Standard size specimens exhibited shorter rupture time than the SSJ specimens. Conclusions The SSJ type specimens provided similar tensile parameters to those from the standard specimen, except total elongation. Creep rupture time of the SSJ specimens were different from the standard specimen, and decreased with decreasing the gauge thickness. |
| format | Article |
| id | doaj-art-2ef882cd84794e48aa13a22fee1ad82c |
| institution | OA Journals |
| issn | 2755-967X |
| language | English |
| publishDate | 2024-07-01 |
| publisher | F1000 Research Ltd |
| record_format | Article |
| series | Nuclear Science and Technology Open Research |
| spelling | doaj-art-2ef882cd84794e48aa13a22fee1ad82c2025-08-20T02:38:22ZengF1000 Research LtdNuclear Science and Technology Open Research2755-967X2024-07-01210.12688/nuclscitechnolopenres.17514.118789Tensile and creep properties of small specimens of reduced-activation ferritic steel F82H, and the correlation to standard specimen data [version 1; peer review: 2 approved, 1 approved with reservations]Jingjie Shen0Takuya Nagasaka1https://orcid.org/0000-0002-5000-1269Taichiro Kato2Masami Ando3Hiroyasu Tanigawa4Takashi Nozawa5National Institute for Fusion Science, Toki, Gifu, 5095292, JapanNational Institute for Fusion Science, Toki, Gifu, 5095292, JapanNational Institutes for Quantum Science and Technology, Rokkasho, Aomori, 0393212, JapanNational Institutes for Quantum Science and Technology, Rokkasho, Aomori, 0393212, JapanNational Institutes for Quantum Science and Technology, Rokkasho, Aomori, 0393212, JapanNational Institutes for Quantum Science and Technology, Rokkasho, Aomori, 0393212, JapanBackground A reduced-activation ferritic/martensitic (RAFM) steel, F82H steel, is the primary candidate structural material for fusion reactor blanket. Small specimen test technique is essential to develop the blanket materials using limited irradiation volume in high flux neutron field. An international collaboration activity “Towards the Standardization of Small Specimen Test Techniques for Fusion Applications” has been initiated under the framework of the International Atomic Energy Agency Coordinated Research Project for Phase I from 2017 to 2021, and Phase II from 2022 to 2026. The present paper reports the preliminary results on tensile and creep tests as a summary of the above Phase I activity. Methods Tensile and creep tests were conducted at 550 and 650°C, using flat-plate SSJ type small specimens with various gauge thickness ranged from 0.14 to 1.2 mm, while gauge length and width are 5 and 1.2 mm, respectively. In addition, round bar type standard specimens with a gauge geometry of 6 mm in diameter and 30 mm in length was also tested for comparison. Results Tensile yield stress, ultimate tensile strength and uniform elongation were independent of the gauge thickness of SSJ specimens, and agreed with the data from the standard size specimens. On the other hand, total elongation was decreased with decreasing the thickness. In creep tests, rupture time was decreased with decreasing the gauge thickness of SSJ specimens. Standard size specimens exhibited shorter rupture time than the SSJ specimens. Conclusions The SSJ type specimens provided similar tensile parameters to those from the standard specimen, except total elongation. Creep rupture time of the SSJ specimens were different from the standard specimen, and decreased with decreasing the gauge thickness.https://nstopenresearch.org/articles/2-56/v1fusion reactor blanket small specimen test technology surface effects environment effectseng |
| spellingShingle | Jingjie Shen Takuya Nagasaka Taichiro Kato Masami Ando Hiroyasu Tanigawa Takashi Nozawa Tensile and creep properties of small specimens of reduced-activation ferritic steel F82H, and the correlation to standard specimen data [version 1; peer review: 2 approved, 1 approved with reservations] Nuclear Science and Technology Open Research fusion reactor blanket small specimen test technology surface effects environment effects eng |
| title | Tensile and creep properties of small specimens of reduced-activation ferritic steel F82H, and the correlation to standard specimen data [version 1; peer review: 2 approved, 1 approved with reservations] |
| title_full | Tensile and creep properties of small specimens of reduced-activation ferritic steel F82H, and the correlation to standard specimen data [version 1; peer review: 2 approved, 1 approved with reservations] |
| title_fullStr | Tensile and creep properties of small specimens of reduced-activation ferritic steel F82H, and the correlation to standard specimen data [version 1; peer review: 2 approved, 1 approved with reservations] |
| title_full_unstemmed | Tensile and creep properties of small specimens of reduced-activation ferritic steel F82H, and the correlation to standard specimen data [version 1; peer review: 2 approved, 1 approved with reservations] |
| title_short | Tensile and creep properties of small specimens of reduced-activation ferritic steel F82H, and the correlation to standard specimen data [version 1; peer review: 2 approved, 1 approved with reservations] |
| title_sort | tensile and creep properties of small specimens of reduced activation ferritic steel f82h and the correlation to standard specimen data version 1 peer review 2 approved 1 approved with reservations |
| topic | fusion reactor blanket small specimen test technology surface effects environment effects eng |
| url | https://nstopenresearch.org/articles/2-56/v1 |
| work_keys_str_mv | AT jingjieshen tensileandcreeppropertiesofsmallspecimensofreducedactivationferriticsteelf82handthecorrelationtostandardspecimendataversion1peerreview2approved1approvedwithreservations AT takuyanagasaka tensileandcreeppropertiesofsmallspecimensofreducedactivationferriticsteelf82handthecorrelationtostandardspecimendataversion1peerreview2approved1approvedwithreservations AT taichirokato tensileandcreeppropertiesofsmallspecimensofreducedactivationferriticsteelf82handthecorrelationtostandardspecimendataversion1peerreview2approved1approvedwithreservations AT masamiando tensileandcreeppropertiesofsmallspecimensofreducedactivationferriticsteelf82handthecorrelationtostandardspecimendataversion1peerreview2approved1approvedwithreservations AT hiroyasutanigawa tensileandcreeppropertiesofsmallspecimensofreducedactivationferriticsteelf82handthecorrelationtostandardspecimendataversion1peerreview2approved1approvedwithreservations AT takashinozawa tensileandcreeppropertiesofsmallspecimensofreducedactivationferriticsteelf82handthecorrelationtostandardspecimendataversion1peerreview2approved1approvedwithreservations |