Evaluation of solution and rheological properties for hydrophobically associated polyacrylamide copolymer as a promised enhanced oil recovery candidate

Crude oil is the most critical energy source in the world, especially for transportation, provision of heat and light as there has not been a sufficient energy source to replace crude oil has broadly integrated, so there is an urgent need to maximize the extraction of the original oil in-place for e...

Full description

Saved in:
Bibliographic Details
Main Authors: A.N. El-hoshoudy, S.E.M. Desouky, A.M. Al-Sabagh, M.A. Betiha, M.Y. El-kady, S. Mahmoud
Format: Article
Language:English
Published: Egyptian Petroleum Research Institute 2017-09-01
Series:Egyptian Journal of Petroleum
Subjects:
Online Access:http://www.sciencedirect.com/science/article/pii/S1110062116300332
Tags: Add Tag
No Tags, Be the first to tag this record!
Description
Summary:Crude oil is the most critical energy source in the world, especially for transportation, provision of heat and light as there has not been a sufficient energy source to replace crude oil has broadly integrated, so there is an urgent need to maximize the extraction of the original oil in-place for every reservoir, and accelerating the development of enhanced oil recovery (EOR) technologies. Polymer flooding by hydrophobically associated polyacrylamides (HAPAM) is a widely used technique through EOR technology. For successful application of these polymers, one should evaluate rheological and solution properties at simulated reservoir conditions as a function of polymer concentration, salinity, temperature and shear rate. The results showed that these copolymers exhibit favorable salt tolerance, temperature resistance, and recoverable viscosity after shearing, reasonable thickening behavior and improved viscosity enhancement properties due to presence of hydrophobic association in the copolymer main chains. Moreover, its capacity for oil production improvement was evaluated during flooding experiments through one dimensional sandstone model at simulated reservoir conditions.
ISSN:1110-0621