A Study on the Wear Characteristics of Al7075 with Changes in Surface Roughness and Ti Thin Film Deposition Time
Mechanical parts have a problem of wear when used in extreme environments. Aluminum, most used in the industrial field, is a representative material of light weight, but its wear resistance is not good. To resolve the wear problem of such materials, research and development of surface thin film depo...
Saved in:
| Main Authors: | , , , , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Wiley
2020-01-01
|
| Series: | Advances in Materials Science and Engineering |
| Online Access: | http://dx.doi.org/10.1155/2020/7934842 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | Mechanical parts have a problem of wear when used in extreme environments. Aluminum, most used in the industrial field, is a representative material of light weight, but its wear resistance is not good. To resolve the wear problem of such materials, research and development of surface thin film deposition technology has been increasing. Wear resistance was investigated after the Ti thin film was deposited by sputtering, one of the main methods of this technique. The smaller the surface roughness value and the thicker the thin film, the better the wear resistance. However, when a thin film is deposited for a predetermined time or less, the bonding strength with the base metal is lowered and the wear resistance is confirmed as low. |
|---|---|
| ISSN: | 1687-8434 1687-8442 |