Waste ceramic powder for sustainable concrete production as supplementary cementitious material
A detailed examination was carried out by substituting waste ceramic powder (WCP) for specific ratios of cement in concrete. To achieve this, five different WCP percentages (10%, 20%, 30%, 40%, and 50%) were used in manufacturing of concrete. First, the workability and slump values in the fresh stat...
Saved in:
| Main Authors: | , , , , , , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Frontiers Media S.A.
2025-02-01
|
| Series: | Frontiers in Materials |
| Subjects: | |
| Online Access: | https://www.frontiersin.org/articles/10.3389/fmats.2024.1450824/full |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| _version_ | 1823856963836968960 |
|---|---|
| author | Yasin Onuralp Özkılıç Yasin Onuralp Özkılıç Alireza Bahrami Yusuf Güzel Ali Sinan Soğancı Memduh Karalar Essam Althaqafi Ali İhsan Çelik Özer Zeybek P. Jagadesh |
| author_facet | Yasin Onuralp Özkılıç Yasin Onuralp Özkılıç Alireza Bahrami Yusuf Güzel Ali Sinan Soğancı Memduh Karalar Essam Althaqafi Ali İhsan Çelik Özer Zeybek P. Jagadesh |
| author_sort | Yasin Onuralp Özkılıç |
| collection | DOAJ |
| description | A detailed examination was carried out by substituting waste ceramic powder (WCP) for specific ratios of cement in concrete. To achieve this, five different WCP percentages (10%, 20%, 30%, 40%, and 50%) were used in manufacturing of concrete. First, the workability and slump values in the fresh state of concrete were determined by performing a slump test. Subsequently, several tests, including compressive strength (CS), splitting tensile strength (STS), and flexural strength (FS), were conducted on the specimens to assess the effectiveness of concrete fabricated using WCP. Variations in the strength were determined in terms of the various amounts of WCP. The findings demonstrated that by including WCP at levels of 10%, 20%, 30%, 40%, and 50%, there were corresponding reductions in CS of 5.8%, 21.8%, 47.1%, 63.2%, and 73.6%, respectively. The decreases in STS were 6.3%, 13.8%, 35.2%, 49.7%, and 65.4%, respectively, when a concrete STS value of 1.59 MPa was considered. Similarly, when the WCP content increased, FS was reduced by 15.3%, 21.4%, 31.6%, 44.9%, and 54.1%, respectively. This is very significant because it represents one of the key issues in calculating the optimal quantity of WCP in relation to both the strength and the amount of WCP utilized. Furthermore, taking into account our experimental research and previous studies on concrete produced utilizing WCP, straightforward equations were provided for practical use to predict CS, STS, and FS. In addition, scanning electron microscopy was done to validate the findings obtained from the experimental part of the study. The artificial neural network modeling technique was adopted to estimate the concrete properties with average coefficients of determination (R2) as 0.945 (CS), 0.901 (STS), and 0.856 (FS) with K-fold cross-validation. |
| format | Article |
| id | doaj-art-237c519b884b43b6b80c2c358306d697 |
| institution | Kabale University |
| issn | 2296-8016 |
| language | English |
| publishDate | 2025-02-01 |
| publisher | Frontiers Media S.A. |
| record_format | Article |
| series | Frontiers in Materials |
| spelling | doaj-art-237c519b884b43b6b80c2c358306d6972025-02-12T04:11:07ZengFrontiers Media S.A.Frontiers in Materials2296-80162025-02-011110.3389/fmats.2024.14508241450824Waste ceramic powder for sustainable concrete production as supplementary cementitious materialYasin Onuralp Özkılıç0Yasin Onuralp Özkılıç1Alireza Bahrami2Yusuf Güzel3Ali Sinan Soğancı4Memduh Karalar5Essam Althaqafi6Ali İhsan Çelik7Özer Zeybek8P. Jagadesh9Department of Civil Engineering, Faculty of Engineering, Necmettin Erbakan University, Konya, TürkiyeDepartment of Technical Sciences, Western Caspian University, Baku, AzerbaijanDepartment of Building Engineering, Energy Systems and Sustainability Science, Faculty of Engineering and Sustainable Development, University of Gävle, Gävle, SwedenDepartment of Civil Engineering, Faculty of Engineering, Necmettin Erbakan University, Konya, TürkiyeDepartment of Civil Engineering, Faculty of Engineering, Necmettin Erbakan University, Konya, TürkiyeDepartment of Civil Engineering, Faculty of Engineering, Zonguldak Bulent Ecevit University, Zonguldak, TürkiyeCivil Engineering Department, College of Engineering, King Khalid University, Abha, Saudi ArabiaDepartment of Construction, Tomarza Mustafa Akincioglu Vocational School, Kayseri University, Kayseri, TürkiyeDepartment of Civil Engineering, Faculty of Engineering, Mugla Sitki Kocman University, Mugla, TürkiyeDepartment of Civil Engineering, Coimbatore Institute of Technology, Coimbatore, IndiaA detailed examination was carried out by substituting waste ceramic powder (WCP) for specific ratios of cement in concrete. To achieve this, five different WCP percentages (10%, 20%, 30%, 40%, and 50%) were used in manufacturing of concrete. First, the workability and slump values in the fresh state of concrete were determined by performing a slump test. Subsequently, several tests, including compressive strength (CS), splitting tensile strength (STS), and flexural strength (FS), were conducted on the specimens to assess the effectiveness of concrete fabricated using WCP. Variations in the strength were determined in terms of the various amounts of WCP. The findings demonstrated that by including WCP at levels of 10%, 20%, 30%, 40%, and 50%, there were corresponding reductions in CS of 5.8%, 21.8%, 47.1%, 63.2%, and 73.6%, respectively. The decreases in STS were 6.3%, 13.8%, 35.2%, 49.7%, and 65.4%, respectively, when a concrete STS value of 1.59 MPa was considered. Similarly, when the WCP content increased, FS was reduced by 15.3%, 21.4%, 31.6%, 44.9%, and 54.1%, respectively. This is very significant because it represents one of the key issues in calculating the optimal quantity of WCP in relation to both the strength and the amount of WCP utilized. Furthermore, taking into account our experimental research and previous studies on concrete produced utilizing WCP, straightforward equations were provided for practical use to predict CS, STS, and FS. In addition, scanning electron microscopy was done to validate the findings obtained from the experimental part of the study. The artificial neural network modeling technique was adopted to estimate the concrete properties with average coefficients of determination (R2) as 0.945 (CS), 0.901 (STS), and 0.856 (FS) with K-fold cross-validation.https://www.frontiersin.org/articles/10.3389/fmats.2024.1450824/fullwaste ceramic powderconcretestrengthartificial neural network modelingsupplementary cementitious material |
| spellingShingle | Yasin Onuralp Özkılıç Yasin Onuralp Özkılıç Alireza Bahrami Yusuf Güzel Ali Sinan Soğancı Memduh Karalar Essam Althaqafi Ali İhsan Çelik Özer Zeybek P. Jagadesh Waste ceramic powder for sustainable concrete production as supplementary cementitious material Frontiers in Materials waste ceramic powder concrete strength artificial neural network modeling supplementary cementitious material |
| title | Waste ceramic powder for sustainable concrete production as supplementary cementitious material |
| title_full | Waste ceramic powder for sustainable concrete production as supplementary cementitious material |
| title_fullStr | Waste ceramic powder for sustainable concrete production as supplementary cementitious material |
| title_full_unstemmed | Waste ceramic powder for sustainable concrete production as supplementary cementitious material |
| title_short | Waste ceramic powder for sustainable concrete production as supplementary cementitious material |
| title_sort | waste ceramic powder for sustainable concrete production as supplementary cementitious material |
| topic | waste ceramic powder concrete strength artificial neural network modeling supplementary cementitious material |
| url | https://www.frontiersin.org/articles/10.3389/fmats.2024.1450824/full |
| work_keys_str_mv | AT yasinonuralpozkılıc wasteceramicpowderforsustainableconcreteproductionassupplementarycementitiousmaterial AT yasinonuralpozkılıc wasteceramicpowderforsustainableconcreteproductionassupplementarycementitiousmaterial AT alirezabahrami wasteceramicpowderforsustainableconcreteproductionassupplementarycementitiousmaterial AT yusufguzel wasteceramicpowderforsustainableconcreteproductionassupplementarycementitiousmaterial AT alisinansogancı wasteceramicpowderforsustainableconcreteproductionassupplementarycementitiousmaterial AT memduhkaralar wasteceramicpowderforsustainableconcreteproductionassupplementarycementitiousmaterial AT essamalthaqafi wasteceramicpowderforsustainableconcreteproductionassupplementarycementitiousmaterial AT aliihsancelik wasteceramicpowderforsustainableconcreteproductionassupplementarycementitiousmaterial AT ozerzeybek wasteceramicpowderforsustainableconcreteproductionassupplementarycementitiousmaterial AT pjagadesh wasteceramicpowderforsustainableconcreteproductionassupplementarycementitiousmaterial |