An experimental study into the net cross-sectional failure of damaged plates with holes for different steel grades and temperatures
This study reports an experimental investigation on the applicability of the net cross-sectional resistance rules of Eurocode 3 for steel plates with different bolt-hole configurations and steel grades, when relatively small fatigue cracks are present at the edge(s) of the holes. Previous studies ha...
Saved in:
| Main Authors: | , , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Gruppo Italiano Frattura
2025-07-01
|
| Series: | Fracture and Structural Integrity |
| Subjects: | |
| Online Access: | https://www.fracturae.com/index.php/fis/article/view/5444/4265 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | This study reports an experimental investigation on the applicability of the net cross-sectional resistance rules of Eurocode 3 for steel plates with different bolt-hole configurations and steel grades, when relatively small fatigue cracks are present at the edge(s) of the holes. Previous studies have confirmed that the considered design rule is on the safe side. Moreover, part of this safety margin accounts for the potential occurrence of relatively small fatigue cracks. Two steel grades are considered, namely S275JR and S700MC. Therefore, in addition to previous studies, a relatively high steel grade is considered. Moreover, some tests were carried out on cooled specimens to get an impression of the effect of low temperatures on the failure mechanism. The experimental results demonstrate that relatively small cracks (less than 1 mm) have a negligible practical influence on the measured ultimate resistance of the plates. Furthermore, the failure assessment diagram is found to be suitable to predict the critical condition in the presence of cracks with length and shape as found in the experiments, also for relatively high steel grades. |
|---|---|
| ISSN: | 1971-8993 |