Preparation of Graphene Nanoplatelets by Thermal Shock Combined with Ball Milling Methods for Fabricating Flame-Retardant Polymers
Graphene nanoplatelets were successfully prepared from graphite powder by simple and scalable thermal shock combined with ball milling methods. The formation of the graphene nanoplatelets were observed by field-emission scanning electron microscopes and Brunauer–Emmett–Teller methods with the much s...
Saved in:
| Main Authors: | , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Wiley
2019-01-01
|
| Series: | Journal of Chemistry |
| Online Access: | http://dx.doi.org/10.1155/2019/5284160 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | Graphene nanoplatelets were successfully prepared from graphite powder by simple and scalable thermal shock combined with ball milling methods. The formation of the graphene nanoplatelets were observed by field-emission scanning electron microscopes and Brunauer–Emmett–Teller methods with the much smaller number of layers and the considerable increase of specific surface area in comparison to the initial expanded graphite material. The other characterizations such as Fourier transform infrared spectroscopy and X-ray powder diffraction methods of graphene nanoplatelets showed unchanged structure. These graphene nanoplatelets were combined with aluminum trihydroxide and zinc borate to prepare flame-retardant polycarbonate plastic and chlorine-sulfonated polyethylene rubber. The prepared composites showed the improvement of flame resistance properties with V0 level according to the UL-94 test method, and the limiting oxygen index value was higher than 27. |
|---|---|
| ISSN: | 2090-9063 2090-9071 |