Preparation of Phosphogypsum–Bentonite-Based Slow-Release Potassium Magnesium Sulfate Fertilizer
The application of slow-release fertilizers is essential for improving fertilizer utilization efficiency and promoting sustainable agricultural development. Unlike traditional single organic polymer-coated or inorganic-coated fertilizers, this study utilized biodegradable modified polyvinyl alcohol...
Saved in:
| Main Authors: | , , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
MDPI AG
2025-03-01
|
| Series: | Agriculture |
| Subjects: | |
| Online Access: | https://www.mdpi.com/2077-0472/15/7/692 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | The application of slow-release fertilizers is essential for improving fertilizer utilization efficiency and promoting sustainable agricultural development. Unlike traditional single organic polymer-coated or inorganic-coated fertilizers, this study utilized biodegradable modified polyvinyl alcohol (PVA) as a binder and cheap, readily available phosphogypsum–bentonite as an inorganic coating material to develop a novel slow-release potassium magnesium sulfate fertilizer (SRPMSF). This study initially examined the influence of SA dosage on PVA properties. XRD, FTIR, TGA, and water resistance analyses revealed that sodium alginate exhibits good compatibility with polyvinyl alcohol, enhancing its heat and water resistance. Ultimately, PVA–SA-2 (1.2% sodium alginate) was chosen as the optimal binder for SRPMSF production. Furthermore, this study investigated the impact of bentonite on the physical and slow-release properties of the SRPMSF by varying the phosphogypsum-to-bentonite ratio. This experiment included five treatment methods: the treatments consist of SRPMSF-1 (0 g bentonite), SRPMSF-2 (phosphogypsum/bentonite ratio of 4:1), SRPMSF-3 (3:2), SRPMSF-4 (2:3), and SRPMSF-5 (1:4). A control group (PMSF) was also included. The results indicated that, as the bentonite content increased, both the particle size and compressive strength of the coated slow-release fertilizer increased, with the SRPMSF particle sizes ranging from 3.00 to 4.50 mm. The compressive strength of the SRPMSF ranged from 20.85 to 43.78 N, meeting the requirements for industrial production. The soil column leaching method was employed to assess the nutrient release rate of the fertilizers. The experimental results indicated that, compared to the PMSF, the SRPMSF effectively regulated nutrient release. Pot experiments demonstrated that the SRPMSF significantly enhanced garlic seedling growth compared to the PMSF. In conclusion, a new type of slow-release fertilizer with good slow-release performance is prepared in this paper, which can improve the utilization rate of fertilizer and reduce the economic loss and is conducive to the sustainable development of agriculture. |
|---|---|
| ISSN: | 2077-0472 |