Mathematical Modeling of Load Capacity and Durability of Metal-Polymeric Bearings with a Composite Bushing Based on Polyamides, Polytetrafluoroethylenes, Polyetheretherketones, or Polyethylene Terephthalates
Predictive assessments of the performance characteristics of metal-polymer (MP) plain bearings at the design stage are necessary and important for engineering practice. They include assessments of bearing capacity, linear wear of the bushing, and bearing life. However, no method for their calculatio...
Saved in:
| Main Authors: | , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
MDPI AG
2024-12-01
|
| Series: | Applied Sciences |
| Subjects: | |
| Online Access: | https://www.mdpi.com/2076-3417/14/23/11275 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | Predictive assessments of the performance characteristics of metal-polymer (MP) plain bearings at the design stage are necessary and important for engineering practice. They include assessments of bearing capacity, linear wear of the bushing, and bearing life. However, no method for their calculation has been developed. The authors created a generalized analytical method for the mathematical modeling of MP sliding bearings as a classical science-based method to study the contact mechanics of conformal cylindrical bodies with consideration of polymer bushing wear. The contact problem of the theory of elasticity takes into account the significant difference in the elasticity characteristics of polymeric materials from those of steel: their Young’s modulus is 60–250 times smaller, and Poisson’s ratio is 1.27–1.37 times larger. The method was used to study MP bearings with bushings made from several common groups of tribopolymers: polyamides (PAs), polytetrafluoroethylenes (PTFEs), polyethylene terephthalates (PETs), and polyetheretherketones (PEEKs). The maximum contact pressures and durability of the dry friction bearings were calculated while taking into account the load; radial clearance; bushing thickness; the tribopolymers’ elasticity characteristics and wear resistance; the sliding friction coefficient; and the type of tribopolymer material. The Young’s modulus of a polymer material had a significant impact on the level of maximum contact pressures. Polymer fillers, depending on their type and the type of polymer, had very different effects on pressure changes (increase, no change, or decrease). An increase in pressure caused an increase in contact pressures. The durability of a mechanical bearing depended not only on the contact pressure but also on the polymer’s wear resistance, Young’s modulus, and friction coefficient. This study determined the quantitative and qualitative effects of these factors on the maximum contact pressures and bearing durability. The presented analytical method provides an effective and reasonable assessment of the specified service characteristics of sliding bearings with consideration of the multifactorial influence of the above factors. |
|---|---|
| ISSN: | 2076-3417 |