Thermal Management of Friction-Drilled A356 Aluminum Alloy: A Study of Preheating and Drilling Parameters

Thermal Management of Friction-Drilled A356 Aluminum Alloy: A Study of Preheating and Drilling Parameters

Friction drilling is a non-conventional process that generates heat through the interaction between a rotating tool and a workpiece, forming a hole with a bushing. In this study, the effect of the preheating temperature, rotational speed, and feed rate on the induced temperature during the friction...

Full description

Saved in:

Bibliographic Details
Main Authors:	Ahmed Abdalkareem, Rasha Afify, Nadia Hamzawy, Tamer S. Mahmoud, Mahmoud Khedr
Format:	Article
Language:	English
Published:	MDPI AG 2024-11-01
Series:	Journal of Manufacturing and Materials Processing
Subjects:	friction drilling bush temperature infrared camera ANOVA Pareto analysis optimization
Online Access:	https://www.mdpi.com/2504-4494/8/6/251
Tags:	Add Tag No Tags, Be the first to tag this record!

Similar Items

ANALYSIS OF THE THERMAL FRICTION DRILLING PROCESS FOR EFFECTIVE PARAMETRIC CHOICE ON THE DRILLING OF AISI 304 STAINLESS STEEL USING THE FUZZY AHP-MOORA METHOD
by: Ugochukwu Sixtus Nwankiti, et al.
Published: (2024-11-01)

Evaluating microstructural and machine learning predictive models for friction drilling of sustainable snail shell reinforced aluminium matrix composites
by: Rajesh Jesudoss Hynes Navasingh, et al.
Published: (2025-08-01)

An analytical model for quantitative evaluation of friction drag in directional sliding drilling
by: Zhengchao Ma, et al.
Published: (2025-05-01)

Bio-coolants for sustainable friction drilling process: A machine learning approach to temperature reduction
by: R. Sankaranarayanan, et al.
Published: (2025-06-01)

Multi optimization of laser drilling of GFRP composites via TOPSIS approach
by: Ahmed Bahei El-Deen Mahrous, et al.
Published: (2025-07-01)

Real-time lithology identification while drilling based on drilling parameters analysis with machine learning
by: Kun Li, et al.
Published: (2025-04-01)

Optimization of Axial Misalignment due to Glass Drilling by Statistical Methods
by: Sabri Ozturk, et al.
Published: (2020-06-01)

Thermal Evaluation of Bone Drilling with a One-Drill Protocol
by: Sihana Rugova, et al.
Published: (2024-10-01)

Critical technical parameters of large-diameter multi-stage casing drilling for mine rescue
by: Chao XU, et al.
Published: (2025-04-01)

Simulation and experimental research on drilling and rock breaking mechanisms of anchor drill rigs with analysis of drilling feedback signals
by: Xiao-He Wang, et al.
Published: (2025-04-01)

Exploring the effect of friction stir welding parameters on the strength of AA2024 and A356-T6 aluminum alloys
by: Ibrahim Sabry
Published: (2024-12-01)

Laser drilling through Hashma sandstone
by: Mohamed Hosin ElNeiri, et al.
Published: (2024-12-01)

Reducing drilling cost of geothermal wells by optimizing drilling operations: Cost effective study
by: M.Y. Amer, et al.
Published: (2025-07-01)

Drilling around the corner: a comprehensive literature review of steerable bone drills
by: Esther P. de Kater, et al.
Published: (2025-04-01)

Corrosion and wear behavior of AISI 4140 brake discs in simulated drilling environments
by: Fikrat Yusubov
Published: (2025-08-01)

Optimization of Process Parameters of Friction Stir Welding by Taguchi Method
by: Azzam Sabah Albunduqee, et al.
Published: (2019-04-01)

The influence of nano-additives on the technical properties of drilling mud for drilling and well reconstruction
by: A.Y. Abusal Yousef, et al.
Published: (2024-12-01)

Coal burst risk monitoring method based on the drilling powder of destressing drilling in coal seam and its application
by: Tongbin ZHAO, et al.
Published: (2025-05-01)

Study of Cutting Forces in Drilling of Aluminum Alloy 2024-T351
by: Răzvan Sebastian Crăciun, et al.
Published: (2024-12-01)

Leveraging boosting machine learning for drilling rate of penetration (ROP) prediction based on drilling and petrophysical parameters
by: Raed H. Allawi, et al.
Published: (2025-06-01)

Real-Time Intelligent Recognition and Precise Drilling in Strongly Heterogeneous Formations Based on Multi-Parameter Logging While Drilling and Drilling Engineering
by: Aosai Zhao, et al.
Published: (2025-05-01)

Experimental analysis of drilling forces and edge defects in SiCp/Al composites using PCD drills
by: Hailong Yang, et al.
Published: (2025-01-01)

Transportation patterns of drilling cuttings and application using the internal row drilling cuttings method in rockburst mines
by: LU Fangqing, et al.
Published: (2025-06-01)

Influence of drilling incidence angle on the drilling force distribution of pneumatic impactor
by: Dongfang Li, et al.
Published: (2025-01-01)

Avoidance of Drill Cap Formation in CFRP-Titanium Stack Materials by Using Vibration Assisted Drilling with Defined Coupling of the Oscillation
by: Stephan Krall, et al.
Published: (2023-05-01)

Analysis of Effects of Drill Collars on the Voltage of Electromagnetic Wave Logging While Drilling
by: GUO Tongzheng
Published: (2023-04-01)

Features of Bending Stresses Calculation for a Drill String Pipes at oil Well Drilling
by: Maryna G. Gegedesh, et al.
Published: (2025-06-01)

Drilling dynamics measurement of drilling motors and its application in recognition of motor operation states through machine learning
by: Fei Li, et al.
Published: (2024-12-01)

Theoretical and experimental study on cutting temperature in the presence of drilling fluid during ice-core drilling
by: Zhuo Chen, et al.
Published: (2024-01-01)

Technological features of the operation of drill bits and drill crowns of PDC series in boring of geological prospecting wells
by: M. S. Frolova
Published: (2016-04-01)

EFFECT OF MOUNT POSITION OF MAIN WINCH ON DRILLING MAST HYDRAULIC CYLINDER LOAD IN ROTARY DRILLING RIG
by: ZHANG Hua, et al.
Published: (2015-01-01)

Application of small self-propelled drill rigs
by: Simić Nikola, et al.
Published: (2025-01-01)

A review of the critical conditions required for effective hole cleaning while horizontal drilling
by: Amir Shokry Youssef, et al.
Published: (2025-04-01)

The analysis of the effect of cutting mode and coolant on formation of burrs when drilling aluminum alloy
by: A.G. Kisel, et al.
Published: (2023-02-01)

Study on high-performance micro foam drilling flushing fluid for coal seam extraction drilling
by: ZHANG Xuebo, et al.
Published: (2025-04-01)

Time-Frequency Feature Extraction Method for Weak Acoustic Signals from Drill Pipe of Seafloor Drill
by: Jingwei Xu, et al.
Published: (2025-04-01)

Influence of the Drilling Parameters in the Single-Lip Deep-Hole Drilling Process on the Surface Integrity of Nickel-Based Alloy
by: Tao Wu, et al.
Published: (2025-06-01)

Modelling and Optimization of Fluid Frictional Torque in a Single Stage Centrifugal Pump with a Vaned Diffuser Based on RSM, ANN and Desirability Function
by: K. Singh, et al.
Published: (2025-01-01)

A Novel Design Method for Chip Flute of Indexable Insert Drill Used at Large Drilling Depth
by: Aisheng Jiang, et al.
Published: (2024-11-01)

Application of modern drilling machines in transport construction
by: Grinchar N.G., et al.
Published: (2020-12-01)