NUMERICAL MODELING OF CONFIGURATION OF CROSSCUT BREAKS IN INGOT OF ROUND CUT, RECEIVED AT MNLZ AT ACCOUNTING OF PLASTIC DEFORMATION OF STEEL
The methods of calculation of probability of crosscut cracks in circular ingot, poured at MNLZ, allowing to take into account the peculiarities of plastic deformation of slug, is offered. The calculations of probability of crosscut cracks in ingot with diameter 140 mm of low-carbon steel are present...
Saved in:
| Main Authors: | , , , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Belarusian National Technical University
2007-02-01
|
| Series: | Литьë и металлургия |
| Online Access: | https://lim.bntu.by/jour/article/view/1321 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | The methods of calculation of probability of crosscut cracks in circular ingot, poured at MNLZ, allowing to take into account the peculiarities of plastic deformation of slug, is offered. The calculations of probability of crosscut cracks in ingot with diameter 140 mm of low-carbon steel are presented on the example of slug with circular section. |
|---|---|
| ISSN: | 1683-6065 2414-0406 |