A Novel Skin Graft Meshing Technique Using Autoclaved Foam

A Novel Skin Graft Meshing Technique Using Autoclaved Foam

Saved in:

Bibliographic Details
Main Authors:	Ganapathy Bhagavathi Rajan, Karthik Kumarasamy, Sindhu Priyanka, Shivaram Bharathwaj, Antony Arvind, Hari Krishna Muram Reddy
Format:	Article
Language:	English
Published:	Thieme Medical and Scientific Publishers Pvt. Ltd. 2023-02-01
Series:	Indian Journal of Plastic Surgery
Online Access:	http://www.thieme-connect.de/DOI/DOI?10.1055/s-0042-1759691
Tags:	Add Tag No Tags, Be the first to tag this record!

Similar Items

Modified Continuous Irrigation Suction System as A Tool in Limb Salvage with Impending Implant Exposure and Eschar
by: Rajan Ganapathy Bhagavathi, et al.
Published: (2020-08-01)

OpenFOAM mesh generation service for cloud computing environment
by: Gao Ruochen, et al.
Published: (2022-04-01)

Bioreactor design from an Obsolete Autoclave
by: Teresa Salazar-Rojas, et al.
Published: (2014-06-01)

Design of OpenFOAM mesh generation client software based on C/S architecture
by: Zhang Zhida, et al.
Published: (2022-02-01)

Porosity and Mechanical Strength of an Autoclaved Clayey Cellular Concrete
by: P. O. Guglielmi, et al.
Published: (2010-01-01)

Acute management of skin tears with mesh grafting: a prospective study and cost-benefit analysis
by: Oliver Chow, et al.
Published: (2023-09-01)

Modeling and simulation of high-pressure industrial autoclave polyethylene reactor
Published: (2008-01-01)

Growing meat on autoclaved vegetables with biomimetic stiffness and micro-patterns
by: Ye Liu, et al.
Published: (2025-01-01)

Effectiveness of autoclaving in sterilizing reusable medical devices in healthcare facilities
by: Gopal Panta, et al.
Published: (2019-10-01)

Decomposition of waste DNA with extended autoclaving under unsaturated steam
by: Tetsushi Suyama, et al.
Published: (2013-12-01)

S-Gal™: An Autoclavable Dye for Color Selection of Cloned DNA Inserts
by: Ken Heuermann, et al.
Published: (2001-05-01)

Role of Non-Mesh Grafts in Surgical Treatment of Stress Urinary Incontinence
by: A. G. Vardikian, et al.
Published: (2024-10-01)

Effect of Dry-Wet Circulation on Moisture Absorption of Autoclaved Aerated Concrete
by: Xiao He, et al.
Published: (2019-01-01)

The Optimization of the Fillet Size of Autoclave Tooth Based on the Experiment and Numerical Simulation
by: Xiaoping Ouyang, et al.
Published: (2023-01-01)

Autoclave reactor synthesis of upconversion nanoparticles, unreported variables, and safety considerations
by: Rebecca McGonigle, et al.
Published: (2025-02-01)

Multilayered Silver-containing Polyurethane-foam (Mepilex Ag) for Tie-over Bolster Fixation of a Skin Graft
by: Yusaku Saijo, MD, et al.
Published: (2024-08-01)

Bone augmentation using bioresorbable mesh domes containing bone graft granules
by: Toshiki Yanagisawa, et al.
Published: (2024-10-01)

Curing Pressure Influence of Out-of-Autoclave Processing on Structural Composites for Commercial Aviation
by: Vasileios M. Drakonakis, et al.
Published: (2013-01-01)

Changes in the crystal lattice of nickel-titanium endodontic instruments as a result of autoclaving
by: Z. S. Khabadze, et al.
Published: (2020-03-01)

Avaliação da esterilização em autoclaves odontológicas através do monitoramento biológico
by: Fabiana Vieira Vier-Pelisser, et al.
Published: (2008-07-01)

Performance and Efficiency of an Autoclave Made from Local Materials in Winter and Summer in Iraq
by: Nada S. Saleh, et al.
Published: (2024-03-01)

The influence of autoclave sterilization on the cyclic fatigue of M-wire rotary endodontic instruments
by: Stošić Nenad, et al.
Published: (2024-01-01)

Avaliação da esterilização em autoclaves odontológicas através do monitoramento biológico
by: Fabiana Vieira Vier-Pelisser, et al.
Published: (2008-07-01)

The Flexural Strength and the Effect of the Autoclave Sterilization of Polypropylene/Natural Rubber Blended Materials
by: Paphavarin Rangsantham, et al.
Published: (2024-11-01)

Prediction of the Temperature of Large Framed Mold and Curing Deformation of Composite Components in the Autoclave Process
by: Zhipeng Wu, et al.
Published: (2022-01-01)

Increasing Sterilization Efficiency of Shredder Autoclave on Medical Waste Using Ultraviolet Light Device
by: Sufyan Mohammed Shartooh, et al.
Published: (2020-02-01)

Replacing Autoclaved Aerated Concrete blocks with conventional blocks in the construction of residential buildings in Rasht
by: Amir Mohammad Babazadeh, et al.
Published: (2024-11-01)

A Scientific Review of Recycling Practices and Challenges for Autoclaved Aerated Concrete in Sustainable Construction
by: Shuxi (Hiro) Wang, et al.
Published: (2025-07-01)

Experimental Investigation Study into the Mechanical Properties of Autoclaved Aerated Concrete and Its Bond Material
by: Sarraa Dhiyaa, et al.
Published: (2025-05-01)

The Usability of Metallurgical Production Waste as a Siliceous Component in Autoclaved Aerated Concrete Technology
by: Lenka Mészárosová, et al.
Published: (2024-10-01)

Features of Producing Non-Autoclaved Aerated Concrete With Additives of Mineral and Technogenic Raw Materials
by: Marzhan A. Sadenova, et al.
Published: (2024-12-01)

Synthesis of tobermorite 11 Å during the formation of autoclaved aerated concrete with the addition of diatomite
by: I. Alejandra Corro-Escorcia, et al.
Published: (2025-06-01)

Properties and Internal Curing of Concrete Containing Recycled Autoclaved Aerated Lightweight Concrete as Aggregate
by: Teewara Suwan, et al.
Published: (2017-01-01)

Laboratory Rational of Changes in the Crystal Lattice of Nickel-Titanium Endodontic Rotary Files in Autoclaving
by: Zurab Khabadze, et al.
Published: (2020-01-01)

Sustainable Construction Practices using Autoclaved Aerated Concrete (AAC) Blocks as a Replacement
by: Thakur Abhishek, et al.
Published: (2024-01-01)

Comparative analysis of autodermal graft and polypropylene mesh use in large incisional hernia defects reconstruction
by: Stojiljković Danilo, et al.
Published: (2013-01-01)

Fabrication of PBAT/lignin composite foam materials with excellent foaming performance and mechanical properties via grafting esterification and twin-screw melting free radical polymerization
by: Hongsen Xu, et al.
Published: (2024-10-01)

The Impact of Multiple Autoclave Cycles on the Surface Roughness of Thermally Treated Nickel-Titanium Endodontic Files
by: Raidan Ba-Hattab, et al.
Published: (2022-01-01)

The Hydrothermal Autoclave Synthesis of the Nanopowders of the Refractory ZrO2 and HfO2 Oxides
by: N.F. Karpovich, et al.
Published: (2015-12-01)

Development of an embedded system-based automatic timing reminder device for improving autoclave cooling period management
by: Yu Meng, et al.
Published: (2025-01-01)