The Effect of Reducing Vibration Of Lathe to Aisi 4340 Surface Roughness
One of the quality affected factors of machined products is surface roughness, which is affected by several factors, like force and vibration. Vibration is the derivation of deflection. To improve efficiency of double chuck, in this experiment will modify the holder of double chuck to decrease the v...
Saved in:
| Main Authors: | , , , , |
|---|---|
| Format: | Article |
| Language: | Indonesian |
| Published: |
Universitas Mercu Buana
2023-10-01
|
| Series: | Jurnal Teknik Mesin |
| Subjects: | |
| Online Access: | https://publikasi.mercubuana.ac.id/index.php/jtm/article/view/23663 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | One of the quality affected factors of machined products is surface roughness, which is affected by several factors, like force and vibration. Vibration is the derivation of deflection. To improve efficiency of double chuck, in this experiment will modify the holder of double chuck to decrease the vibration. The modifications are divided into used wood to decrease length force from clamp and change the entry angle from 45° to 90°. The vibration was measured by a vibrometer at the vertical axis. Each modification succeeded to decrease the vibration at a reduction of 1.5 mm, where the highest decrease was changed the entry angle from 0.21-0.23 m/s2 to 0.10 m/s2. Modification on changed the entry angle has better surface roughness which the value of 1.3 µm. |
|---|---|
| ISSN: | 2089-7235 2549-2888 |