High Absorption Broadband Ultra-Long Infrared Absorption Device Based on Nanoring–Nanowire Metasurface Structure
Long-wave infrared (LWIR) broadband absorption is of great significance in science and technology. The electromagnetic field energy is absorbed by the metamaterials material, leading to the enhanced light absorption, from which the Metal–Dielectric–Metal (MDM) structure is designed. FDTD simulation...
Saved in:
| Main Authors: | , , , , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
MDPI AG
2025-05-01
|
| Series: | Photonics |
| Subjects: | |
| Online Access: | https://www.mdpi.com/2304-6732/12/5/451 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | Long-wave infrared (LWIR) broadband absorption is of great significance in science and technology. The electromagnetic field energy is absorbed by the metamaterials material, leading to the enhanced light absorption, from which the Metal–Dielectric–Metal (MDM) structure is designed. FDTD simulation calculation indicate that the bandwidth within which the absorber absorption ratio greater than 90% is 11.04 μm, and the average absorption rate (9.10~20.14 μm) is 93.6%, which can be accounted for by the impedance matching theory. Upon the matching of the impedance of the metamaterial absorber with the impedance of the incident light, the light reflection is reduced to a minimum, and increase the absorption ratio. Meanwhile, the good incidence angle unsensitivity due to the metasurface structural symmetry and the characteristics of the electromagnetic field distribution at different incidence angles. Due to the form regularity of the nanoring–nanowire metasurface structure, the light acts similar in different polarization directions, and the surface plasmon resonance plays a key role. Using FDTD electromagnetic field analysis to visualize the electric field and magnetic field strength distribution within the absorber, the electromagnetic field at the interface in the nanoring–nanowire metasurface structure, promote the surface plasmon resonance and interaction with damaged materials, and improve the light absorption efficiency. Moreover, the different microstructures and the electrical and optical properties of different top materials affect the light absorption. Meanwhile, adjusting the absorption layer thickness and periodic geometry parameters will also change the absorption spectrum. The absorber has high practical value in thermal electronic devices, infrared imaging, and thermal detection. |
|---|---|
| ISSN: | 2304-6732 |