Improved out-of-plane properties through alternative print path and in-layer heating
Anisotropy in fused filament fabrication of short fibre-reinforced polymer composites is mainly caused by uniform fibre direction and poor layer bonding. This study aims to improve the out-of-plane mechanical performance of carbon fiber-reinforced polyamide 6 parts by combining in-layer infrared pos...
Saved in:
| Main Authors: | , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Taylor & Francis Group
2025-12-01
|
| Series: | Virtual and Physical Prototyping |
| Subjects: | |
| Online Access: | https://www.tandfonline.com/doi/10.1080/17452759.2025.2521106 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| _version_ | 1849702548947075072 |
|---|---|
| author | Ole S. Nesheim Anni Cao Lisa Ducarouge Christer W. Elverum |
| author_facet | Ole S. Nesheim Anni Cao Lisa Ducarouge Christer W. Elverum |
| author_sort | Ole S. Nesheim |
| collection | DOAJ |
| description | Anisotropy in fused filament fabrication of short fibre-reinforced polymer composites is mainly caused by uniform fibre direction and poor layer bonding. This study aims to improve the out-of-plane mechanical performance of carbon fiber-reinforced polyamide 6 parts by combining in-layer infrared postheating and a custom lifting toolpath designed to orient fibres in the out-of-plane direction. Single-walled samples manufactured with the lifting (L) and conventional toolpath (C) were printed at 1.2 and 3mm/s. Mechanical testing revealed an increased tensile modulus of 11.5% solely from the L toolpath. Compared to benchmark samples, an increase of 118.9% and 207.4% in ultimate tensile strength (UTS) and tensile modulus, respectively, was observed. Scanning electron microscope (SEM) images and crystallinity measurements indicated that while out-of-plane fibre rotation occurred within individual layers, it did not sufficiently bridge stacked layers to significantly impact UTS. The primary increase in UTS was thus attributed to enhanced matrix bonding due to postheating, while the L toolpath effectively increased the tensile modulus. Based on matrix structure variations observed in the SEM images, we hypothesize that the initially porous structure solidifying after material deposition can be effectively eliminated by postheating, resulting in increased interlayer contact area, ultimately enhancing UTS. |
| format | Article |
| id | doaj-art-04ff92b14c3c466eb52d17ef56d1893c |
| institution | DOAJ |
| issn | 1745-2759 1745-2767 |
| language | English |
| publishDate | 2025-12-01 |
| publisher | Taylor & Francis Group |
| record_format | Article |
| series | Virtual and Physical Prototyping |
| spelling | doaj-art-04ff92b14c3c466eb52d17ef56d1893c2025-08-20T03:17:36ZengTaylor & Francis GroupVirtual and Physical Prototyping1745-27591745-27672025-12-0120110.1080/17452759.2025.2521106Improved out-of-plane properties through alternative print path and in-layer heatingOle S. Nesheim0Anni Cao1Lisa Ducarouge2Christer W. Elverum3Department of Mechanical and Industrial Engineering, NTNU, Trondheim, NorwayDepartment of Mechanical and Industrial Engineering, NTNU, Trondheim, NorwayDepartment of Mechanical and Industrial Engineering, NTNU, Trondheim, NorwayDepartment of Mechanical and Industrial Engineering, NTNU, Trondheim, NorwayAnisotropy in fused filament fabrication of short fibre-reinforced polymer composites is mainly caused by uniform fibre direction and poor layer bonding. This study aims to improve the out-of-plane mechanical performance of carbon fiber-reinforced polyamide 6 parts by combining in-layer infrared postheating and a custom lifting toolpath designed to orient fibres in the out-of-plane direction. Single-walled samples manufactured with the lifting (L) and conventional toolpath (C) were printed at 1.2 and 3mm/s. Mechanical testing revealed an increased tensile modulus of 11.5% solely from the L toolpath. Compared to benchmark samples, an increase of 118.9% and 207.4% in ultimate tensile strength (UTS) and tensile modulus, respectively, was observed. Scanning electron microscope (SEM) images and crystallinity measurements indicated that while out-of-plane fibre rotation occurred within individual layers, it did not sufficiently bridge stacked layers to significantly impact UTS. The primary increase in UTS was thus attributed to enhanced matrix bonding due to postheating, while the L toolpath effectively increased the tensile modulus. Based on matrix structure variations observed in the SEM images, we hypothesize that the initially porous structure solidifying after material deposition can be effectively eliminated by postheating, resulting in increased interlayer contact area, ultimately enhancing UTS.https://www.tandfonline.com/doi/10.1080/17452759.2025.2521106FFFtoolpathin-layer heatinganisotropycarbon fibre |
| spellingShingle | Ole S. Nesheim Anni Cao Lisa Ducarouge Christer W. Elverum Improved out-of-plane properties through alternative print path and in-layer heating Virtual and Physical Prototyping FFF toolpath in-layer heating anisotropy carbon fibre |
| title | Improved out-of-plane properties through alternative print path and in-layer heating |
| title_full | Improved out-of-plane properties through alternative print path and in-layer heating |
| title_fullStr | Improved out-of-plane properties through alternative print path and in-layer heating |
| title_full_unstemmed | Improved out-of-plane properties through alternative print path and in-layer heating |
| title_short | Improved out-of-plane properties through alternative print path and in-layer heating |
| title_sort | improved out of plane properties through alternative print path and in layer heating |
| topic | FFF toolpath in-layer heating anisotropy carbon fibre |
| url | https://www.tandfonline.com/doi/10.1080/17452759.2025.2521106 |
| work_keys_str_mv | AT olesnesheim improvedoutofplanepropertiesthroughalternativeprintpathandinlayerheating AT annicao improvedoutofplanepropertiesthroughalternativeprintpathandinlayerheating AT lisaducarouge improvedoutofplanepropertiesthroughalternativeprintpathandinlayerheating AT christerwelverum improvedoutofplanepropertiesthroughalternativeprintpathandinlayerheating |