Mechanistic Study of Oil Adsorption Behavior and CO<sub>2</sub> Displacement Mechanism Under Different pH Conditions
Enhanced oil recovery (EOR) via CO<sub>2</sub> flooding is a promising strategy for improving hydrocarbon recovery and carbon sequestration, yet the influence of pH on solid–liquid interfacial interactions in quartz-dominated reservoirs remains poorly understood. This study employs molec...
Saved in:
| Main Authors: | , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
MDPI AG
2025-07-01
|
| Series: | Molecules |
| Subjects: | |
| Online Access: | https://www.mdpi.com/1420-3049/30/14/2999 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | Enhanced oil recovery (EOR) via CO<sub>2</sub> flooding is a promising strategy for improving hydrocarbon recovery and carbon sequestration, yet the influence of pH on solid–liquid interfacial interactions in quartz-dominated reservoirs remains poorly understood. This study employs molecular dynamics (MD) simulations to investigate the pH-dependent adsorption behavior of crude oil components on quartz surfaces and its impact on CO<sub>2</sub> displacement mechanisms. Three quartz surface models with varying ionization degrees (0%, 9%, 18%, corresponding to pH 2–4, 5–7, and 7–9) were constructed to simulate different pH environments. The MD results reveal that aromatic hydrocarbons exhibit significantly stronger adsorption on quartz surfaces at high pH, with their maximum adsorption peak increasing from 398 kg/m<sup>3</sup> (pH 2–4) to 778 kg/m<sup>3</sup> (pH 7–9), while their alkane adsorption peaks decrease from 764 kg/m<sup>3</sup> to 460 kg/m<sup>3</sup>. This pH-dependent behavior is attributed to enhanced cation–π interactions that are facilitated by Na<sup>+</sup> ion aggregation on negatively charged quartz surfaces at high pH, which form stable tetrahedral configurations with aromatic molecules and surface oxygen ions. During CO<sub>2</sub> displacement, an adsorption–stripping–displacement mechanism was observed: CO<sub>2</sub> first forms an adsorption layer on the quartz surface, then penetrates the oil phase to induce the detachment of crude oil components, which are subsequently displaced by pressure. Although high pH enhances the Na<sup>+</sup>-mediated weakening of oil-surface interactions, which leads to a 37% higher diffusion coefficient (8.5 × 10<sup>−5</sup> cm<sup>2</sup>/s vs. 6.2 × 10<sup>−5</sup> cm<sup>2</sup>/s at low pH), the tighter packing of aromatic molecules at high pH slows down the displacement rate. This study provides molecular-level insights into pH-regulated adsorption and CO<sub>2</sub> displacement processes, highlighting the critical role of the surface charge and cation–π interactions in optimizing CO<sub>2</sub>-EOR strategies for quartz-rich reservoirs. |
|---|---|
| ISSN: | 1420-3049 |