Back-Calculation of Soil Modulus from PFWD Based on a Viscoelastic Model
To improve the accuracy of back-calculation of soil modulus using the portable falling weight deflectometer (PFWD), a viscoelastic method (VEM) overcoming the limitations of the conventional linear elastic method (LEM) was proposed. A quasi-static dynamic analysis technique of Laplace transformation...
Saved in:
| Main Authors: | , , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Wiley
2019-01-01
|
| Series: | Advances in Civil Engineering |
| Online Access: | http://dx.doi.org/10.1155/2019/1316341 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | To improve the accuracy of back-calculation of soil modulus using the portable falling weight deflectometer (PFWD), a viscoelastic method (VEM) overcoming the limitations of the conventional linear elastic method (LEM) was proposed. A quasi-static dynamic analysis technique of Laplace transformation and a modified Gauss–Newton optimization algorithm were adopted in the proposed method. The back-calculation program was compiled with MATLAB. The effectiveness of the proposed method was verified with the in situ plate load test (PLT) conducted on a highway embankment. In situ test results showed that a time lag existed between the peaks of deflection and load, and load-deflection curves were nonlinear, which indicated the viscoelastic nature of the soil. The back-calculated modulus using the LEM and VEM was higher than that using the PLT. In the case of low stiffness soil, the average error of back-calculation using the LEM and VEM was 53.1% and 14.8%, respectively. However, for stiffer soil, the average error of back-calculation using the LEM and VEM method was 12.4% and 4.3%, respectively. Moduli of back-calculation using LEM and VEM methods were used to perform flexible pavement analysis, which showed that with an 8% reduction of modulus, the pavement service life reduced by 25%. More accurate estimation of modulus can save maintenance cost in the future. |
|---|---|
| ISSN: | 1687-8086 1687-8094 |