Measuring thermoelectric module properties by time-domain impedance spectroscopy using heat leakage at 300 K

Abstract All key thermoelectric properties of thermoelectric materials (i.e., resistivity ρ, dimensionless figure of merit zT, thermal conductivity κ TE , and Seebeck coefficient S) were measured at 300 K using time-domain impedance spectroscopy (TDIS). This method accounted for heat leakage through...

Full description

Saved in:
Bibliographic Details
Main Authors: Kotoko Kodama, Yasuhiro Hasegawa
Format: Article
Language:English
Published: Nature Portfolio 2025-03-01
Series:Scientific Reports
Subjects:
Online Access:https://doi.org/10.1038/s41598-025-94235-3
Tags: Add Tag
No Tags, Be the first to tag this record!
Description
Summary:Abstract All key thermoelectric properties of thermoelectric materials (i.e., resistivity ρ, dimensionless figure of merit zT, thermal conductivity κ TE , and Seebeck coefficient S) were measured at 300 K using time-domain impedance spectroscopy (TDIS). This method accounted for heat leakage through lead wires connected to a bismuth–telluride-based Π-shaped thermoelectric module. The values of ρ and zT, without considering heat leakage, were rapidly determined in the frequency domain using impedance measurements with alternating current and in the time domain through transient-response measurements with direct current. The thermal conductance ratio K lead /K TE , which represents the relationship between the thermal conductance of the thermoelectric material K TE and that of the lead wires causing heat leakage K lead , was also evaluated. The effective dimensionless figure of merit zT eff was estimated at various K lead /K TE ratios to assess the influence of heat leakage. At 300 K, the estimated thermoelectric parameters were ρ = 10.19 μΩm, zT = 0.8645 ± 0.0003, κ TE  = 1.259 ± 0.003 W/mK, and |S| = 192.3 ± 0.4 μV/K. The results indicate that for accurate determination of all thermoelectric parameters using TDIS, the condition K lead /K TE  > 0.1 is required when performing K lead /K TE -dependent experiments on the modules with zT = 0.8645.
ISSN:2045-2322